Radwin R G, Oh S, Jensen T R, Webster J G
Department of Industrial Engineering, University of Wisconsin, Madison 53706.
Ergonomics. 1992 Mar;35(3):275-88. doi: 10.1080/00140139208967813.
Small conductive polymer force sensors were attached to the distal phalangeal pads for measuring individual finger forces exerted during submaximal static pinch. A linear force summing strain gauge dynamometer for measuring resultant five-finger pinch force was grasped vertically using a neutral wrist posture. Individual finger forces were measured at fixed total pinch force levels of 10%, 20%, and 30% of maximum voluntary exertion using pinch spans of 45 mm and 65 mm. Total pinch force and individual finger forces were also measured while similarly grasping the dynamometer and supporting fixed weights for 1.0 kg, 1.5 kg, and 2.0 kg loads using pinch spans of 45 mm and 65 mm. The index and middle fingers exerted more than 3 N greater average force than the ring and small fingers for the fixed total pinch force task. No significant individual finger force differences were observed at the 10% maximum voluntary exertion level, however both the index and middle fingers exerted more than 5 N greater force than the ring and small fingers at the 30% maximum voluntary exertion level. The average contribution of the index, middle, ring, and small fingers were 33%, 33%, 17%, and 15%, respectfully, for the fixed total pinch force task. As exertion level increased from 10% to 30%, the contribution of the middle finger was not constant increasing from 25% to 38%. Total pinch force increased from 15 N to 30 N when the load weight increased from 1.0 kg to 2.0 kg.(ABSTRACT TRUNCATED AT 250 WORDS)
小型导电聚合物力传感器附着于远节指骨垫,用于测量次最大静态捏力时各手指施加的力。使用中立腕位姿势垂直握持线性力求和应变片式测力计,以测量五指捏力的合力。分别在最大自主用力的10%、20%和30%的固定总捏力水平下,采用45毫米和65毫米的捏距测量各手指的力。在以45毫米和65毫米的捏距类似地握持测力计并支撑1.0千克、1.5千克和2.0千克负载1.0千克、1.5千克和2.0千克负载时,也测量了总捏力和各手指的力。在固定总捏力任务中,示指和中指施加的平均力比环指和小指大3牛以上。在最大自主用力水平的10%时,未观察到各手指力有显著差异,然而在最大自主用力水平的30%时,示指和中指施加的力比环指和小指大5牛以上。在固定总捏力任务中,示指、中指、环指和小指的平均贡献率分别为33%、33%、17%和15%。随着用力水平从10%增加到30%,中指的贡献率并非从25%持续增加到38%。当负载重量从1.0千克增加到2.0千克时,总捏力从15牛增加到30牛。(摘要截于250字)