Kelly Terri-Ann N, Ng Kenneth W, Wang Christopher C-B, Ateshian Gerard A, Hung Clark T
Cellular Engineering Laboratory, Department of Biomedical Engineering, Columbia University, New York, NY 10027, USA.
J Biomech. 2006;39(8):1489-97. doi: 10.1016/j.jbiomech.2005.03.031. Epub 2005 Jun 28.
Dynamic deformational loading has been shown to significantly increase the development of material properties of chondrocyte-seeded agarose hydrogels, however little is known about the spatial development of the material properties within these constructs. In this study, a technique that combines video microscopy and optimized digital image correlation, was applied to assess the spatial development of material properties in tissue-engineered cartilage constructs cultured in free-swelling and dynamically-loaded conditions (3h/day, 5 days/week, and maintained in free-swelling conditions when not being loaded) over a 6-week period. Although homogeneous at day 0, both free-swelling and dynamically loaded samples progressively developed stiffer outer edges and a softer central region. The distribution of GAGs and collagens were shown to mimic this profile. These results indicate that although dynamic loading augments the development of bulk properties in these samples, possibly by overcoming some of the diffusion limitation and nutrient transport issues, the overall profile of construct properties in the axial direction remains qualitatively the same as in free-swelling culture conditions. Poisson's ratio of these constructs increased over time in culture with increased fixed charged density contributed by the GAGs, but this increase was significantly less in dynamically loaded samples by day 42. Polarized light microscopy of Picrosirius Red labeled samples, at an angle perpendicular to the direction of loading, suggests that these differences in Poisson's ratio may be due to improved organization of collagen network in the dynamically loaded samples.
动态变形加载已被证明能显著促进接种软骨细胞的琼脂糖水凝胶材料特性的发展,然而对于这些构建物中材料特性的空间发展情况却知之甚少。在本研究中,一种结合视频显微镜和优化数字图像相关技术被用于评估在自由膨胀和动态加载条件(每天3小时,每周5天,未加载时保持自由膨胀条件)下培养6周的组织工程软骨构建物中材料特性的空间发展情况。尽管在第0天时是均匀的,但自由膨胀和动态加载的样本都逐渐形成了更硬的外边缘和更软的中心区域。糖胺聚糖(GAGs)和胶原蛋白的分布也呈现出类似的模式。这些结果表明,尽管动态加载可能通过克服一些扩散限制和营养物质运输问题来增强这些样本的整体特性发展,但构建物在轴向的整体特性分布在质量上仍与自由膨胀培养条件下相同。随着培养时间的推移,这些构建物的泊松比随着GAGs贡献的固定电荷密度增加而增加,但到第42天时,动态加载样本中的增加幅度明显较小。对天狼星红染色样本进行垂直于加载方向的偏振光显微镜观察表明,泊松比的这些差异可能是由于动态加载样本中胶原网络组织的改善。