Davidson Melanie T M, Batchelar Deidre L, Velupillai Sujeevan, Denstedt John D, Cunningham Ian A
Imaging Research Laboratories, Robarts Research Institute, London, ON N6A 5K8, Canada.
Phys Med Biol. 2005 Aug 21;50(16):3773-86. doi: 10.1088/0031-9155/50/16/008. Epub 2005 Jul 28.
Monoenergetic x-ray diffraction (XRD) analysis is an established standard for the assessment of urinary stone composition. The inherent low energy of x-rays used (8 keV), however, restricts penetration depth and imposes a requirement for small powdered samples. A technique capable of producing detailed information regarding component structural arrangements in calculi non-destructively would provide clearer insights into causes of formation and subsequent growth and allow the selection of more appropriate courses of therapy. We describe a new method based on the detection of coherent scatter (CS) in stone components using polyenergetic x-rays (70 kVp) from diagnostic equipment. While the higher energy allows the analysis of intact calculi, the polyenergetic source causes an angular broadening of measured CS patterns. We show that it is possible to relate the polyenergetic (CS) and monoenergetic (XRD) measurements through a superposition integral of the monoenergetic XRD cross-section with a function representative of the polyenergetic spectrum used in CS. Experimentally acquired diffractometry cross-sections of the seven major urinary stone components were subjected to this operation, revealing good agreement of diffraction features with CS. Therefore, our CS analysis is sensitive to stone component structure, similar to conventional XRD analysis. This indicates that CS analysis can be used as a basis to classify urinary calculi by composition. The potential of identifying stone components non-destructively was demonstrated from a tomographic CS analysis of a stone-mimicking phantom. Tomographic composition maps were generated from CS patterns, showing the structural arrangement of multiple stone components within the phantom. CS analysis has the ability to detect components in the presence of many others. The ability to perform CS measurements in intact calculi would allow for the identification of stone structures critical to patient metaprophylaxis.
单能X射线衍射(XRD)分析是评估尿石成分的既定标准。然而,所用X射线的固有低能量(8 keV)限制了穿透深度,并且对小的粉末样品有要求。一种能够无损地产生有关结石中成分结构排列详细信息的技术,将能更清晰地洞察结石形成及后续生长的原因,并有助于选择更合适的治疗方案。我们描述了一种基于使用诊断设备产生的多能X射线(70 kVp)检测结石成分中的相干散射(CS)的新方法。虽然较高能量允许对完整结石进行分析,但多能源会导致测量的CS图案出现角度展宽。我们表明,通过将单能XRD截面与代表CS中使用的多能谱的函数进行叠加积分,可以将多能(CS)和单能(XRD)测量联系起来。对七种主要尿石成分的实验获取的衍射测量截面进行了此操作,结果显示衍射特征与CS有良好的一致性。因此,我们的CS分析对结石成分结构敏感,类似于传统的XRD分析。这表明CS分析可作为按成分对尿结石进行分类的基础。通过对结石模拟体模的断层CS分析,证明了无损识别结石成分的潜力。从CS图案生成了断层成分图,显示了体模内多种结石成分的结构排列。CS分析有能力在存在许多其他成分的情况下检测出目标成分。在完整结石中进行CS测量的能力将有助于识别对患者预防至关重要的结石结构。