Simoneit Bernd R T, Medeiros Patricia M, Didyk Borys M
Environmental and Petroleum Research Group, College of Oceanic and Atmospheric Sciences, Oregon State University, Corvallis, Oregon 97331, USA.
Environ Sci Technol. 2005 Sep 15;39(18):6961-70. doi: 10.1021/es050767x.
Despite all of the economic problems and environmental discussions on the dangers and hazards of plastic materials, plastic production worldwide is growing at a rate of about 5% per year. Increasing techniques for recycling polymeric materials have been developed during the last few years; however, a large fraction of plastics are still being discarded in landfills or subjected to intentional or incidental open-fire burning. To identify specific tracer compounds generated during such open-fire combustion, both smoke particles from burning and plastic materials from shopping bags, roadside trash, and landfill garbage were extracted for gas chromatography-mass spectrometry analyses. Samples were collected in Concón, Chile, an area frequently affected by wildfire incidents and garbage burning, and the United States for comparison. Atmospheric samples from various aerosol sampling programs are also presented as supportive data. The major components of plastic extracts were even-carbon-chain n-alkanes (C16-C40), the plasticizer di-2-ethylhexyl phthalate, and the antioxidants and lubricants/antiadhesives Irganox 1076, Irgafos 168, and its oxidation product tris(2,4-di-tertbutylphenyl) phosphate. Major compounds in smoke from burning plastics include the non-source-specific n-alkanes (mainly even predominance), terephthalic acid, phthalates, and 4-hydroxybenzoic acid, with minor amounts of polycyclic aromatic hydrocarbons (including triphenylbenzenes) and tris(2,4-di-tert-butylphenyl)phosphate. 1,3,5-Triphenylbenzene and tris(2,4-di-tert-butylphenyl)- phosphate were found in detectable amounts in atmospheric samples where plastics and refuse were burned in open fires, and thus we propose these two compounds as specific tracers for the open-burning of plastics.
尽管存在所有经济问题以及围绕塑料材料的危险和危害展开的环境讨论,但全球塑料产量仍以每年约5%的速度增长。在过去几年中,已开发出越来越多的聚合物材料回收技术;然而,仍有很大一部分塑料被丢弃在垃圾填埋场,或被有意或无意地露天焚烧。为了识别这种露天燃烧过程中产生的特定示踪化合物,对燃烧产生的烟雾颗粒以及来自购物袋、路边垃圾和垃圾填埋场垃圾的塑料材料进行了提取,用于气相色谱-质谱分析。样本采集于智利的孔孔,该地区经常受到野火事件和垃圾焚烧的影响,并在美国采集样本进行比较。还展示了来自各种气溶胶采样项目的大气样本作为支持数据。塑料提取物的主要成分是偶数碳链的正构烷烃(C16 - C40)、增塑剂邻苯二甲酸二(2 - 乙基己基)酯,以及抗氧化剂和润滑剂/抗粘剂抗氧剂1076、亚磷酸三(2,4 - 二叔丁基苯基)酯及其氧化产物磷酸三(2,4 - 二叔丁基苯基)酯。燃烧塑料产生的烟雾中的主要化合物包括非源特异性的正构烷烃(主要是偶数优势)、对苯二甲酸、邻苯二甲酸盐和4 - 羟基苯甲酸,还有少量多环芳烃(包括三苯苯)和磷酸三(2,4 - 二叔丁基苯基)酯。在塑料和垃圾露天焚烧的大气样本中检测到了可检测量的1,3,5 - 三苯苯和磷酸三(2,4 - 二叔丁基苯基)酯,因此我们提议将这两种化合物作为塑料露天燃烧的特定示踪剂。