Suppr超能文献

年轻健康人群安静站立时压力中心的传统测量方法与分形维测量方法的可靠性

Reliability of traditional and fractal dimension measures of quiet stance center of pressure in young, healthy people.

作者信息

Doyle Tim L, Newton Robert U, Burnett Angus F

机构信息

School of Biomedical and Sports Science, Edith Cowan University, Joondalup, Western Australia, Australia.

出版信息

Arch Phys Med Rehabil. 2005 Oct;86(10):2034-40. doi: 10.1016/j.apmr.2005.05.014.

Abstract

OBJECTIVES

To assess reliability of traditional and fractal dimension measures of quiet stance center of pressure (COP).

DESIGN

Cross-sectional study.

SETTING

University laboratory.

PARTICIPANTS

Thirty young healthy men (n=20) and women (n=10) (mean age, 23 y).

INTERVENTIONS

Not applicable.

MAIN OUTCOME MEASURES

COP was recorded for 3 trials across 4 conditions: eyes open and eyes closed standing on firm and foam surfaces. Traditional COP variables--peak sway velocity and range of sway, both in the anteroposterior (AP) and mediolateral (ML) directions, and total excursion area, and fractal dimension of the COP in the AP and ML directions--were calculated. Reliability statistics were calculated.

RESULTS

Range of sway (AP) was the most reliable traditional variable (intraclass correlation coefficient model 2,1 [ICC(2,1)] range -.28 to .72.). Peak sway velocity (AP) had poorest reliability (ICC(2,1) range, .05-.29). Only 1 of the traditional variables had excellent reliability; total excursion area (firm, eyes closed) (ICC(2,1)=.95). All bar 1 fractal dimension measures had excellent ICCs. Relative technical error of measurement ranged from 4% to 7% for the fractal dimension measures. Coefficients of variation were also very good, ranging from 1.8% to 6.7%.

CONCLUSIONS

Fractal dimension measures were more reliable than traditional measures of COP. Although traditional measures are used extensively to assess COP, their reliability is questionable. Fractal dimension measures show promise to reliably quantify COP and warrant further investigation.

摘要

目的

评估安静站立时压力中心(COP)的传统测量方法和分形维测量方法的可靠性。

设计

横断面研究。

地点

大学实验室。

参与者

30名年轻健康男性(n = 20)和女性(n = 10)(平均年龄23岁)。

干预措施

不适用。

主要观察指标

在4种条件下进行3次试验记录COP:睁眼和闭眼站立在坚实和泡沫表面上。计算传统的COP变量——前后(AP)和内外侧(ML)方向的峰值摆动速度和摆动范围,以及总偏移面积,以及AP和ML方向上COP的分形维。计算可靠性统计量。

结果

摆动范围(AP)是最可靠的传统变量(组内相关系数模型2,1 [ICC(2,1)]范围为 -0.28至0.72)。峰值摆动速度(AP)的可靠性最差(ICC(2,1)范围为0.05 - 0.29)。只有1个传统变量具有出色的可靠性;总偏移面积(坚实,闭眼)(ICC(2,1) = 0.95)。除1个分形维测量指标外,所有分形维测量指标的ICC均出色。分形维测量指标的相对技术测量误差范围为4%至7%。变异系数也非常好,范围为1.8%至6.7%。

结论

分形维测量方法比COP的传统测量方法更可靠。尽管传统测量方法被广泛用于评估COP,但其可靠性值得怀疑。分形维测量方法有望可靠地量化COP,值得进一步研究。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验