Orkoula Malvina G, Koutsoukos Petros G
Institute of Chemical Engineering and High Temperature Chemical Processes, Foundation for Research and Technology Hellas, GR-26500 Patras, Greece.
J Colloid Interface Sci. 2003 Mar 15;259(2):287-92. doi: 10.1016/S0021-9797(02)00175-3.
In the present study, the effect of mesopore and particle size distributions on the kinetics of dissolution of powdered Pentelic marble was investigated. Powders obtained by grinding marble slabs in an agate mortar with a pestle (1-3.5 min) were found to be non-porous by nitrogen absorption measurements. These powders, upon dissolution under conditions of constant under-saturation, 25 degrees C, pH 8.25, showed that the kinetics in the absence of mesopores depended on the number of active sites on the exposed surface. Thus, powders consisting of smaller particles, having higher specific surface areas, yielded higher rates of dissolution. Powders, however, which were prepared by grinding marble slabs in a cylinder mill for time periods between 2.0 and 30.0 min, and which exhibited considerable mesoporosity, showed the opposite trend. The rates of dissolution measured for these powders in under-saturated solutions increased with increasing mean particle size and decreased with increasing specific surface area. This finding suggested that the presence of mesopores resulted in lower dissolution rates even though the exposed total surface area was larger. Furthermore, the larger the number of mesopores in a powder sample the slower the corresponding dissolution rates in under-saturated solutions.
