Suppr超能文献

对饱和条件下含水层中大肠杆菌和耐热大肠菌群的迁移与存活的文献数据评估。

Evaluation of data from the literature on the transport and survival of Escherichia coli and thermotolerant coliforms in aquifers under saturated conditions.

作者信息

Foppen J W A, Schijven J F

机构信息

UNESCO-IHE Institute for Water Education, Department of Water Engineering, P.O. Box 3015, 2601 DA Delft, The Netherlands.

出版信息

Water Res. 2006 Feb;40(3):401-26. doi: 10.1016/j.watres.2005.11.018. Epub 2006 Jan 23.

Abstract

Escherichia coli and thermotolerant coliforms are of major importance as indicators of fecal contamination of water. Due to its negative surface charge and relatively low die-off or inactivation rate coefficient, E. coli is able to travel long distances underground and is therefore also a useful indicator of fecal contamination of groundwater. In this review, the major processes known to determine the underground transport of E. coli (attachment, straining and inactivation) are evaluated. The single collector contact efficiency (SCCE), eta0, one of two parameters commonly used to assess the importance of attachment, can be quantified for E. coli using classical colloid filtration theory. The sticking efficiency, alpha, the second parameter frequently used in determining attachment, varies widely (from 0.003 to almost 1) and mainly depends on charge differences between the surface of the collector and E. coli. Straining can be quantified from geometrical considerations; it is proposed to employ a so-called straining correction parameter, alpha(str). Sticking efficiencies determined from field experiments were lower than those determined under laboratory conditions. We hypothesize that this is due to preferential flow mechanisms, E. coli population heterogeneity, and/or the presence of organic and inorganic compounds in wastewater possibly affecting bacterial attachment characteristics. Of equal importance is the inactivation or die-off of E. coli that is affected by factors like type of bacterial strain, temperature, predation, antagonism, light, soil type, pH, toxic substances, and dissolved oxygen. Modeling transport of E. coli can be separated into three steps: (1) attachment rate coefficients and straining rate coefficients can be calculated from Darcy flow velocity fields or pore water flow velocity fields, calculated SCCE fields, realistic sticking efficiency values and straining correction parameters, (2) together with the inactivation rate coefficient, total rate coefficient fields can be generated, and (3) used as input for modeling the transport of E. coli in existing contaminant transport codes. Areas of future research are manifold and include the effects of typical wastewater characteristics, including high concentrations of organic compounds, on the transport of E. coli and thermotolerant coliforms, and the upscaling of experiments to represent typical field conditions, possibly including preferential flow mechanisms and the aspect of population heterogeneity of E. coli.

摘要

大肠杆菌和耐热大肠菌群作为水体粪便污染的指标具有重要意义。由于其表面带负电荷且死亡或失活速率系数相对较低,大肠杆菌能够在地下远距离迁移,因此也是地下水粪便污染的有用指标。在本综述中,对已知决定大肠杆菌地下迁移的主要过程(附着、过滤截留和失活)进行了评估。单收集器接触效率(SCCE),即η0,是常用于评估附着重要性的两个参数之一,可使用经典胶体过滤理论对大肠杆菌进行量化。黏附效率α是确定附着时常用的第二个参数,其变化范围很大(从0.003到几乎1),主要取决于收集器表面与大肠杆菌之间的电荷差异。过滤截留可从几何因素进行量化;建议采用所谓的过滤截留校正参数α(str)。现场实验确定的黏附效率低于实验室条件下确定的黏附效率。我们推测这是由于优先流机制、大肠杆菌种群异质性和/或废水中有机和无机化合物的存在可能影响细菌附着特性。同样重要的是大肠杆菌的失活或死亡,这受到细菌菌株类型、温度、捕食、拮抗作用、光照、土壤类型、pH值、有毒物质和溶解氧等因素的影响。大肠杆菌迁移建模可分为三个步骤:(1) 附着速率系数和过滤截留速率系数可根据达西流速场或孔隙水流速场、计算得到的SCCE场、实际黏附效率值和过滤截留校正参数进行计算,(2) 与失活速率系数一起生成总速率系数场,(3) 用作现有污染物迁移代码中大肠杆菌迁移建模的输入。未来的研究领域是多方面的,包括典型废水特性(包括高浓度有机化合物)对大肠杆菌和耐热大肠菌群迁移的影响,以及将实验放大以代表典型现场条件,可能包括优先流机制和大肠杆菌种群异质性方面。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验