Dutta Samrat, Perring Mathew, Barrett Stephen, Mitchell Michael, Kenis Paul J A, Bowden Ned B
Department of Chemistry, University of Iowa, 423K Chemistry Building, Iowa City, Iowa 52242, USA.
Langmuir. 2006 Feb 28;22(5):2146-55. doi: 10.1021/la0532196.
This paper reports the functionalization and patterning of olefin-terminated monolayers on Si(111) through cross metathesis. A simple, one-step synthesis of a diolefin--CH2=CH(CH2)9O(CH2)9CH=CH2--was developed from commercially available starting materials. Mixed partially olefin-terminated monolayers of this novel diolefin and 1-octadecene on hydrogen-terminated Si(111) were obtained. The olefins are raised above the rest of the monolayer and thus sterically accessible for further functionalization. Olefin-terminated monolayers were reacted with the Grubbs' first generation catalyst and olefins in solution that were terminated with fluorines, carboxylic acids, alcohols, aldehydes, and alkyl bromides. Characterization of these monolayers using X-ray photoelectron spectroscopy and horizontal attenuated total reflection infrared spectroscopy demonstrated that olefins on the surface had reacted via cross metathesis to expose fluorines, carboxylic acids, aldehydes, alcohols, and bromides. Through calibration experiments, we demonstrated a simple 1:1 correspondence between the ratio of olefins in solution used in the assembly and the final composition of the mixed monolayers. Finally, these monolayers on silicon were patterned on the micrometer-size scale by soft lithography using microfluidic channels patterned into poly(dimethylsiloxane) (PDMS) stamps. Micrometer-wide lines of polymer brushes were synthesized on these monolayers and characterized by scanning electron microscopy. In addition, olefin-terminated monolayers were patterned into micrometer-sized lines exposing carboxylic acids by cross metathesis with olefins in solution. This method of patterning is broadly applicable and can find applications in a variety of fields including the development of biosensors and nanoelectronics.
本文报道了通过交叉复分解反应实现硅(111)表面烯烃封端单分子层的功能化和图案化。利用市售原料开发了一种简单的一步法合成二烯烃——CH2=CH(CH2)9O(CH2)9CH=CH2。在氢封端的硅(111)上获得了这种新型二烯烃与1-十八碳烯的混合部分烯烃封端单分子层。烯烃高于单分子层的其他部分,因此在空间上易于进行进一步的功能化。烯烃封端的单分子层与第一代格拉布催化剂以及溶液中末端带有氟、羧酸、醇、醛和烷基溴的烯烃发生反应。使用X射线光电子能谱和水平衰减全反射红外光谱对这些单分子层进行表征,结果表明表面的烯烃通过交叉复分解反应发生了反应,从而暴露出氟、羧酸、醛、醇和溴化物。通过校准实验,我们证明了组装过程中所用溶液中烯烃的比例与混合单分子层的最终组成之间存在简单的1:1对应关系。最后,通过使用图案化到聚二甲基硅氧烷(PDMS)印章中的微流体通道进行软光刻,在微米尺寸尺度上对硅上的这些单分子层进行图案化。在这些单分子层上合成了微米宽的聚合物刷,并通过扫描电子显微镜进行了表征。此外,通过与溶液中的烯烃进行交叉复分解反应,将烯烃封端的单分子层图案化为暴露羧酸的微米尺寸线条。这种图案化方法具有广泛的适用性,可在包括生物传感器和纳米电子学发展在内的各种领域找到应用。