使用SU-8模具制造聚二甲基硅氧烷微流体器件。

Fabrication of polydimethylsiloxane microfluidics using SU-8 molds.

作者信息

Zaouk Rabih, Park Benjamin Y, Madou Marc J

机构信息

Department of Mechanical Engineering, University of California-Irvine, USA.

出版信息

Methods Mol Biol. 2006;321:17-21. doi: 10.1385/1-59259-997-4:17.

DOI:10.1385/1-59259-997-4:17

PMID:16508061

Abstract

We detail the widely prevalent technique of polydimethylsiloxane (PDMS) molding using SU-8 for creating microfluidic chambers and channels. Although other techniques such as injection molding are more apt for mass manufacturing and cost-effective, PDMS molding is used almost exclusively for rapid prototyping in corporate and research environments because of its simplicity and fast turnaround time.

摘要

我们详细介绍了一种广泛应用的技术，即使用SU-8进行聚二甲基硅氧烷（PDMS）成型，以创建微流体腔室和通道。尽管其他技术（如注塑成型）更适合大规模生产且成本效益更高，但由于其简单性和快速周转时间，PDMS成型几乎专门用于企业和研究环境中的快速原型制作。