Hardy Stuart M, Melroy Christopher, White David R, Dubin Marc, Senior Brent
Department of Otolaryngology, University of North Carolina at Chapel Hill, NC 27599-7070, USA.
Am J Rhinol. 2006 Jan-Feb;20(1):48-52.
Stereotactic computer-aided surgery has provided the surgeon with a means to navigate more safely through diseased or surgically altered sinus anatomy. Accurate registration is vital to successful image-guided surgery. This study compared the accuracy and performance of three registration methods: fiducial, anatomic landmarks, and surface registration.
Ten fixed cadaveric heads underwent endoscopic computed tomography scan followed by middle meatal antrostomy and sphenoidotomy. Each registration method was performed, and the time required and mean registration error were recorded. Five anatomic sites were then identified and compared with the preoperative computed tomography images. The true distances between the known anatomic sites and the crosshair locations on the images were measured.
Statistically significant differences were noted for mean registration error and time for registration. The mean +/-SEM time for registration for the fiducial, surface, and landmark methods were 5 minutes 24 seconds +/-27 seconds, 1 minute 1 second +/-5 seconds, and 11 minutes 46 seconds +/-45 seconds, respectively. The mean +/-SEM registration error for the fiducial, surface, and landmark methods were 0.48 +/- 0.21 mm, 1.05 +/- 0.06 mm, and 3.1 +/- 0.25 mm, respectively. When the true accuracy of the three registration methods were compared, no significant difference was found between fiducial and surface registration. However, fiducial registration was significantly more accurate than landmark registration at all points. When compared with landmark registration, surface registration was statistically more accurate at all anatomic sites except for the sella turcica and optic nerve.
When the true accuracies of these methods were compared in fixed cadaveric specimens,fiducial and surface registration were statistically similar but were found to be significantly more accurate than landmark registration. Furthermore, when time of registration, accuracy, and ease of use were considered, surface registration was found superior.
立体定向计算机辅助手术为外科医生提供了一种手段,使其能够更安全地在病变或经手术改变的鼻窦解剖结构中进行操作。准确的配准对于成功的图像引导手术至关重要。本研究比较了三种配准方法的准确性和性能:基准点、解剖标志和表面配准。
对10个固定的尸体头部进行内镜计算机断层扫描,随后进行中鼻道上颌窦造口术和蝶窦切开术。每种配准方法都进行了操作,并记录所需时间和平均配准误差。然后确定5个解剖部位,并与术前计算机断层扫描图像进行比较。测量已知解剖部位与图像上十字准线位置之间的真实距离。
在平均配准误差和配准时间方面存在统计学上的显著差异。基准点、表面和标志方法的平均±标准误配准时间分别为5分24秒±27秒、1分1秒±5秒和11分46秒±45秒。基准点、表面和标志方法的平均±标准误配准误差分别为0.48±0.21毫米、1.05±0.06毫米和3.1±0.25毫米。当比较三种配准方法的真实准确性时,基准点配准和表面配准之间未发现显著差异。然而,在所有点上,基准点配准都比标志配准显著更准确。与标志配准相比,除蝶鞍和视神经外,在所有解剖部位表面配准在统计学上更准确。
在固定的尸体标本中比较这些方法的真实准确性时,基准点配准和表面配准在统计学上相似,但被发现比标志配准显著更准确。此外,当考虑配准时间、准确性和易用性时,表面配准被认为更具优势。