Dargel Jens, Pohl Peer, Tzikaras Prokopios, Koebke Juergen
Institute for Biomechanics and Orthopaedics, German Sport University Cologne, Carl-Diem-Weg 6, 50933 Cologne, Germany.
Surg Radiol Anat. 2006 Aug;28(4):398-402. doi: 10.1007/s00276-006-0107-y. Epub 2006 Apr 11.
Graft placement in cruciate ligament reconstruction is known to significantly influence postoperative knee stability and range of motion. Improvement of bone tunnel positioning has been advocated by computer-assisted surgical procedures that require reliable input and reference data. This study validates the hypothesis that morphometric reference data can be obtained from the uninjured controlateral knee for accurate bone tunnel and graft positioning. Thirty pairs of human cadaver knees were dissected and the femoral and tibial footprints of the anterior and posterior cruciate ligaments (PCL) were radiopaquely marked. Radiographs were taken of the corresponding left- and right-sided femora and tibiae, and digitally processed. Controlateral specimens were mirrored and overlapped precisely, the areas and intersections of ligament insertion were digitally determined. There were no significant differences in the total area of cruciate ligament insertion between left and right knee specimens or between female and male specimens. Intersection areas (IAs) in femoral and tibial anterior cruciate ligament (ACL) insertions averaged 31.3 and 33.4% of the total insertion area, respectively. The center of gravity for the femoral and tibial ACL footprint differed by 4.7 and 4.5 mm between left and right knees, respectively. IAs in femoral and tibial PCL insertions averaged 46.1 and 61.3% of the total insertion area, respectively. The center of gravity for the femoral and tibial PCL footprint differed by 4.5 and 2.4 mm between left and right knees, respectively. Our study does not support the concept of obtaining morphologic reference data from the uninjured controlateral knee for individual bone tunnel placement.
已知在交叉韧带重建中移植物的放置会显著影响术后膝关节的稳定性和活动范围。计算机辅助手术程序提倡改进骨隧道定位,这需要可靠的输入和参考数据。本研究验证了这样一个假设,即可以从未受伤的对侧膝关节获取形态测量参考数据,以实现准确的骨隧道和移植物定位。解剖了30对人体尸体膝关节,并对前交叉韧带(ACL)和后交叉韧带(PCL)的股骨和胫骨足迹进行了不透射线标记。拍摄了相应的左右股骨和胫骨的X线片,并进行数字处理。将对侧标本精确镜像并重叠,通过数字方式确定韧带插入的面积和交叉点。左右膝关节标本之间或男女标本之间,交叉韧带插入的总面积没有显著差异。股骨和胫骨ACL插入处的交叉面积(IAs)分别平均占总插入面积的31.3%和33.4%。左右膝关节之间,股骨和胫骨ACL足迹的重心分别相差4.7毫米和4.5毫米。股骨和胫骨PCL插入处的IAs分别平均占总插入面积的46.1%和61.3%。左右膝关节之间,股骨和胫骨PCL足迹的重心分别相差4.5毫米和2.4毫米。我们的研究不支持从未受伤的对侧膝关节获取形态学参考数据用于个体骨隧道放置的概念。