Camiré C L, Nevsten P, Lidgren L, McCarthy I
Biomechanics and Biomaterials Laboratory, Department of Orthopedics, Clinical Sciences, Lund, Lund University Hospital, 221 85 Lund, Sweden.
J Biomed Mater Res B Appl Biomater. 2006 Oct;79(1):159-65. doi: 10.1002/jbm.b.30526.
Alpha phase tricalcium phosphates (alpha-TCP) were produced using a solid-state reaction method and milled for various periods of time. The resulting four materials were alpha-TCPs, ranging in crystalline content. Powders were exposed to X-ray diffraction for material identification as well as for use in crystallinity and purity calculations. Powder particle size was investigated using laser diffraction. Materials were mixed with 2.5% Na(2)HPO(4) solution to initiate the hydration of alpha-TCP to calcium-deficient hydroxyapatite (CDHA). Isothermal calorimetry was performed to observe thermal response of the powders over a period of time. During the reaction process, at various time points up to 216 h, the material was compression tested to observe strength development. Materials proved to be predominantly alpha phase, while amorphous content determined by XRD varied. Reactivity, as measured by isothermal calorimetry, varied with crystallinity of the alpha-TCP powder. Speed of strength development did not change except for the most finely ground powder. In addition, crystal size of the CDHA was changed only in the product formed from the most highly ground material. It is proposed that increasing reactivity of alpha-TCP cements does not result in a corresponding increase in rate of strength development until there is sufficient supersaturation to produce significant crystal nucleation.
采用固态反应法制备了α相磷酸三钙(α-TCP),并研磨不同时间。得到的四种材料均为α-TCP,晶体含量不同。将粉末进行X射线衍射以鉴定材料,并用于结晶度和纯度计算。使用激光衍射研究粉末粒度。将材料与2.5%的Na₂HPO₄溶液混合,以引发α-TCP水合生成缺钙羟基磷灰石(CDHA)。进行等温量热法以观察粉末在一段时间内的热响应。在反应过程中,直至216小时的不同时间点,对材料进行压缩测试以观察强度发展。材料主要为α相,而通过XRD测定的无定形含量有所不同。通过等温量热法测量的反应性随α-TCP粉末的结晶度而变化。除了研磨最细的粉末外,强度发展速度没有变化。此外,仅由研磨程度最高的材料形成的产物中CDHA的晶体尺寸发生了变化。有人提出,在没有足够的过饱和度以产生显著的晶体成核之前,提高α-TCP水泥的反应性不会导致强度发展速率相应增加。