Hausmann Ulrich, Feussner Hubertus, Ahrens Philipp, Heinzl Joachim
Micro Technology and Medical Device Technology, Technische Universität München, Boltzmannstrasse 15, 85748 Garching, Germany.
Gastrointest Endosc. 2006 Jul;64(1):101-3. doi: 10.1016/j.gie.2005.10.031.
Endoluminal endoscopy could be significantly enhanced by adequate approaches to wound closure. Current solutions are basically confined to clip applications.
A new approach to sewing in flexible endoscopy is achieved with an endoluminal rivet system. This system allows the application of several ligatures without withdrawing the rivet application device to reload. For this purpose, a pilot experimental study of the device was conducted, which obtained a tissue approximation and avoided the difficult process of knot tying.
Pilot experimental study.
The rivet application was tested through a 1.8-mm working channel of the endoscope in laboratory and postmortem animal tissues. It consists of a flexible anchor at the front and a lockable bracket at the rear. Both edges of a defect of the GI wall can be aligned and compressed, thus leading to wound closure.
Test samples were evaluated in postmortem gastric tissue by using flexible gastroscopes. The feasibility of applying a series of rivets with 1 instrument to close transmural lacerations of the stomach was demonstrated. Further tests were performed to determine the forces to penetrate the gastric wall.
Tissue closure, rivet degradation.
The penetration force can be brought down to less than 0.57 N by using a magnesium tip. The sharp tip of the rivet, which could potentially lacerate healthy tissue after implantation, is degraded in the stomach within the first few hours because of rapid corrosion.
Lack of in vivo feasibility data.
Endoluminal wound closure through common gastroscopes and colonoscopes is possible. Further in vivo data are required for the rivet system.
通过适当的伤口闭合方法可显著增强腔内内镜检查效果。目前的解决方案基本局限于使用夹子。
利用腔内铆钉系统实现柔性内镜检查中的一种新型缝合方法。该系统允许在不撤回铆钉施加装置重新装填的情况下应用多个结扎线。为此,对该装置进行了一项初步实验研究,该研究实现了组织贴合并避免了打结的困难过程。
初步实验研究。
通过在内窥镜的1.8毫米工作通道对实验室和死后动物组织进行铆钉施加测试。它由前端的柔性锚和后端的可锁定支架组成。胃肠道壁缺损的两边可对齐并压缩,从而实现伤口闭合。
使用柔性胃镜在死后胃组织中评估测试样本。证明了使用一种器械应用一系列铆钉来闭合胃全层撕裂伤的可行性。还进行了进一步测试以确定穿透胃壁所需的力。
组织闭合、铆钉降解。
使用镁尖可将穿透力降低至小于0.57牛。铆钉的尖锐尖端在植入后可能会撕裂健康组织,但由于快速腐蚀,在胃内最初几个小时内就会降解。
缺乏体内可行性数据。
通过普通胃镜和结肠镜进行腔内伤口闭合是可行的。铆钉系统还需要进一步的体内数据。