Suppr超能文献

巩膜瓣位置和尺寸对实验性小梁切除术中眼压控制的影响。

The influence of scleral flap position and dimensions on intraocular pressure control in experimental trabeculectomy.

作者信息

Birchall Wayne, Wakely Laura, Wells Anthony P

机构信息

Wellington Hospital, Riddiford Street, Wellington 6000, New Zealand.

出版信息

J Glaucoma. 2006 Aug;15(4):286-90. doi: 10.1097/01.ijg.0000212241.18842.83.

Abstract

PURPOSE

To assess the effect on intraocular pressure (IOP) of varying the length of the side incisions of the scleral flap during trabeculectomy.

MATERIALS AND METHODS

Trabeculectomy operations were performed with adjustable sutures on 8 donor human eyes connected to a constant flow infusion with real-time IOP monitoring, using either a large (4 x 4 mm, 16 mm, n=8) or a small (3 x 2 mm, 6 mm, n=8) scleral flap. For each flap the side incisions began 1 mm behind the limbus and extended to the posterior edge of the flap. The side incisions were extended sequentially in 0.5-mm steps up to the limbus, then each flap dissected 1 mm further into clear cornea.

RESULTS

Mean IOP after sclerostomy fashioning was 0.84 mm Hg (range 0 to 2.7 mm Hg). After flap closure, with side incisions extending to 1 mm behind the limbus, mean IOP was 21.6 mm Hg (79.5% of baseline) and 23.03 mm Hg (79.2% of baseline) for large and small flaps (P=0.26). In each size group, extending flap side incisions to the limbus produced a small nonsignificant fall in mean IOP, whereas flap extension 1 mm into clear cornea led to a significantly lower mean IOP relative to baseline of 43.2% (P<0.05) for large flaps and 35.4% for small flaps (P<0.01).

CONCLUSIONS

Using this adjustable suture technique, IOP is well maintained for both flap sizes if the flap and side incisions do not extend beyond the limbus. Excessive forward dissection of a scleral flap into the clear cornea, anterior to the sclerostomy may result in increased aqueous outflow and lower IOP.

摘要

目的

评估小梁切除术中巩膜瓣侧切口长度变化对眼内压(IOP)的影响。

材料与方法

对8只供体人眼进行小梁切除术,术中使用可调节缝线,并连接恒流灌注系统进行实时眼压监测,巩膜瓣采用大尺寸(4×4mm,16mm,n = 8)或小尺寸(3×2mm,6mm,n = 8)。对于每个巩膜瓣,侧切口从角膜缘后1mm处开始,延伸至巩膜瓣后缘。侧切口以0.5mm的步长依次延伸至角膜缘,然后每个巩膜瓣再向透明角膜内进一步分离1mm。

结果

巩膜造瘘成型后的平均眼压为0.84mmHg(范围为0至2.7mmHg)。巩膜瓣关闭后,侧切口延伸至角膜缘后1mm时,大尺寸和小尺寸巩膜瓣的平均眼压分别为21.6mmHg(基线的79.5%)和23.03mmHg(基线的79.2%)(P = 0.26)。在每个尺寸组中,将巩膜瓣侧切口延伸至角膜缘会使平均眼压有小幅但无统计学意义的下降,而将巩膜瓣向透明角膜内延伸1mm会导致平均眼压相对于基线显著降低,大尺寸巩膜瓣降低43.2%(P < 0.05),小尺寸巩膜瓣降低35.4%(P < 0.01)。

结论

采用这种可调节缝线技术,如果巩膜瓣和侧切口不超过角膜缘,两种尺寸的巩膜瓣都能很好地维持眼压。巩膜瓣在巩膜造瘘前方过度向前分离进入透明角膜可能会导致房水流出增加和眼压降低。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验