Suppr超能文献

制定马来西亚职业接触健康危害的相关规定。

Developing regulations for occupational exposures to health hazards in Malaysia.

作者信息

Rampal Krishna Gopal, Mohd Nizam J

机构信息

Department of Community Health, Faculty of Medicine, National University of Malaysia, Malaysia.

出版信息

Regul Toxicol Pharmacol. 2006 Nov;46(2):131-5. doi: 10.1016/j.yrtph.2006.01.013. Epub 2006 Aug 8.

Abstract

In Malaysia exposures in the workplace are regulated under the Factories and Machinery Act (FMA), 1967 and also under the more comprehensive Occupational Safety and Health Act (OSHA) enacted in 1994. With OSHA 1994 the philosophy of legislating safety and health in the workplace changed from one that was very prescriptive and containing detailed technical provisions under FMA, 1967 to one that is more flexible and encourages self-regulation under OSHA 1994. OSHA 1994 is supported by regulations, codes of practices and guidelines to further clarify the provisions in the Act. Under the FMA 1967 emphasis was on safety while with OSHA 1994 there has been equal emphasis on addressing health hazards in the workplace. Regulations for occupational exposures are developed by the Department of Occupational Safety and Health with tripartite and stakeholder consultation. When developing these regulations International Labor Organization Conventions, laws of other countries and occupational exposure standards adopted internationally are reviewed. The government also conducts surveys to collect information on both exposures and health effects in workplaces to have better understanding on specific occupational health problems. Effective law enforcement is crucial in ensuring compliance to safety and health law. The challenge at the moment is to ensure all employers and employees, particularly those in the small and medium enterprises, understand and comply with the provisions stipulated in the legislation.

摘要

在马来西亚,工作场所的接触受1967年《工厂与机械法》(FMA)以及1994年颁布的更为全面的《职业安全与健康法》(OSHA)监管。随着1994年《职业安全与健康法》的出台,工作场所安全与健康立法的理念从1967年《工厂与机械法》那种规定性很强且包含详细技术条款的模式,转变为1994年《职业安全与健康法》下更灵活且鼓励自我监管的模式。1994年《职业安全与健康法》得到了相关条例、操作规范和指南的支持,以进一步阐明该法案中的条款。1967年《工厂与机械法》强调安全,而1994年《职业安全与健康法》则同样重视应对工作场所的健康危害。职业接触条例由职业安全与健康部在三方和利益相关者协商的基础上制定。在制定这些条例时,会参考国际劳工组织公约、其他国家的法律以及国际采用的职业接触标准。政府还开展调查,收集关于工作场所接触情况和健康影响的信息,以便更好地了解具体的职业健康问题。有效的执法对于确保遵守安全与健康法律至关重要。目前面临的挑战是确保所有雇主和雇员,尤其是中小企业的雇主和雇员,理解并遵守立法规定的条款。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验