Fetzer David T, Green Charles, West O Clark
University of Texas Health Science Center at Houston Medical School, Diagnostic and Interventional Imaging, 6431 Fannin, MSB 2.100, Houston, TX 77030, USA.
Acad Radiol. 2006 Oct;13(10):1244-53. doi: 10.1016/j.acra.2006.07.002.
Acute traumatic aorta injuries (ATAIs) following blunt thoracic trauma require rapid and accurate diagnosis for institution of lifesaving treatment. The use of computed tomography (CT) in the diagnosis of such injuries continues to improve and has the potential to become the diagnostic modality of choice in many trauma centers. A standardized diagnostic model may contribute to improvements in radiologist interpretation of CT for ATAIs.
The following diagnostic criteria were used to develop a diagnostic model for ATAIs: 11 areas of potential hematoma formation were identified in the mediastinum. Maximum short- and long-axis cross-sectional diameters of the aorta were measured. Qualitative morphologic information (contour change, intimal flap) was recorded. Smoothness of the aorta wall was assessed. These characteristics were quantified and analyzed for statistical significance, allowing for the development of an injury assessment model.
The diagnostic model was used to score 69 blunt thoracic trauma patient cases. Average weighted kappa was 0.74, showing strong agreement among two observers and reproducibility of the model. The model improved injury assessment by classifying equivocal cases as either positive or negative. The ROC curve calculated from the original radiologist interpretation contained 86.1% area under the curve, while the curve for the new model contained 97.5%. The likelihood ratio increased from 30.06 to 48.67. The degree to which the new measure improved prediction over the original radiologist reading was tested using a nested model and yielded a reliable increment in model fit (chi2 analysis: Deltachi2(3) = 20.929, P < or = .0001). Finally, beta weights calculated from each variable were used to create a quantitative best-fit diagnostic model for future use.
We have developed a diagnostic tool that may help radiologists better evaluate CT for ATAIs.
钝性胸部创伤后的急性创伤性主动脉损伤(ATAIs)需要快速准确的诊断以实施挽救生命的治疗。计算机断层扫描(CT)在这类损伤诊断中的应用不断改进,并且有潜力在许多创伤中心成为首选的诊断方式。标准化的诊断模型可能有助于提高放射科医生对ATAIs的CT解读水平。
采用以下诊断标准来建立ATAIs的诊断模型:在纵隔中确定11个可能形成血肿的区域。测量主动脉的最大短轴和长轴横截面直径。记录定性形态学信息(轮廓变化、内膜瓣)。评估主动脉壁的光滑度。对这些特征进行量化和统计显著性分析,从而建立损伤评估模型。
该诊断模型用于对69例钝性胸部创伤患者病例进行评分。平均加权kappa值为0.74,表明两名观察者之间有很强的一致性且模型具有可重复性。该模型通过将可疑病例分类为阳性或阴性来改进损伤评估。根据放射科医生的原始解读计算出的ROC曲线下面积为86.1%,而新模型的曲线下面积为97.5%。似然比从30.06增加到48.67。使用嵌套模型测试新测量方法相对于放射科医生原始读数在预测方面的改进程度,结果显示模型拟合有可靠的增加(卡方分析:Deltachi2(3) = 20.929,P≤0.0001)。最后,根据每个变量计算出的β权重用于创建一个定量的最佳拟合诊断模型以供未来使用。
我们开发了一种诊断工具,可能有助于放射科医生更好地评估ATAIs的CT。