Schweyer-Tihay Fanny, Estournès Claude, Braunstein Pierre, Guille Jean, Paillaud Jean-Louis, Richard-Plouet Mireille, Rosé Jacky
Groupe des Matériaux Inorganiques, Institut de Physique et Chimie des Matériaux, UMR 7504 CNRS, 23 rue du Loess, 67037 Strasbourg Cedex, France.
Phys Chem Chem Phys. 2006 Sep 14;8(34):4018-28. doi: 10.1039/b603404g. Epub 2006 Aug 1.
We report on the impregnation of THF solutions of the low-valent heterometallic cluster NEt(4)[Co(3)Ru(CO)(12)] into two mesoporous silica matrices, amorphous xerogels and ordered MCM-41, and a study of its thermal decomposition into metallic nanoparticles by X-ray diffraction, transmission electron microscopy and in situ magnetic measurements under controlled atmospheres. The decomposition of the cluster was monitored as a function of temperature by examining the chemical composition of the particles, their size distributions and their structures as well as their magnetic properties. Treatment under inert atmosphere (i.e. argon) at temperatures below 200 degrees C resulted in the formation of segregated spherical particles of hcp-ruthenium (2.3 +/- 1.0 nm) and hcp-cobalt (3.1 +/- 0.9 nm). The latter is transformed to fcc-cobalt (3.2 +/- 1.0 nm) above 270 degrees C. At higher temperatures, Co-Ru alloying takes place and the Ru content of the particles increases with increasing temperature to reach the nominal composition of the molecular precursor, Co(3)Ru. The particles are more evenly distributed in the MCM-41 framework compared to the disordered xerogel and also show a narrower size distribution. Owing to the different magnetic anisotropy of hcp- and fcc-cobalt, which results in different blocking temperatures, we were able to clearly identify the products formed at the early stages of the thermal decomposition procedure.
我们报道了将低价异金属簇合物NEt(4)[Co(3)Ru(CO)(12)]的四氢呋喃溶液浸渍到两种介孔二氧化硅基质(无定形干凝胶和有序的MCM-41)中,并通过X射线衍射、透射电子显微镜以及在可控气氛下的原位磁测量研究其热分解为金属纳米颗粒的过程。通过检查颗粒的化学成分、尺寸分布、结构及其磁性能,监测簇合物的分解随温度的变化。在低于200℃的惰性气氛(即氩气)中处理导致形成六方密堆积钌(2.3±1.0nm)和六方密堆积钴(3.1±0.9nm)的分离球形颗粒。后者在27℃以上转变为面心立方钴(3.2±1.0nm)。在较高温度下,发生Co-Ru合金化,颗粒中的Ru含量随温度升高而增加,达到分子前驱体Co(3)Ru的标称组成。与无序干凝胶相比,颗粒在MCM-41骨架中分布更均匀,尺寸分布也更窄。由于六方密堆积钴和面心立方钴的磁各向异性不同,导致阻塞温度不同,我们能够清楚地识别热分解过程早期形成的产物。