Suppr超能文献

正畸钢丝的银焊、电阻焊和激光焊接的体外毒性评估。

In vitro toxicity evaluation of silver soldering, electrical resistance, and laser welding of orthodontic wires.

作者信息

Sestini Silvia, Notarantonio Laura, Cerboni Barbara, Alessandrini Carlo, Fimiani Michele, Nannelli Pietro, Pelagalli Antonio, Giorgetti Roberto

机构信息

Department of Molecular Biology, University of Siena, Italy.

出版信息

Eur J Orthod. 2006 Dec;28(6):567-72. doi: 10.1093/ejo/cjl048. Epub 2006 Oct 11.

Abstract

The long-term effects of orthodontic appliances in the oral environment and the subsequent leaching of metals are relatively unknown. A method for determining the effects of various types of soldering and welding, both of which in turn could lead to leaching of metal ions, on the growth of osteoblasts, fibroblasts, and oral keratinocytes in vitro, is proposed. The effects of cell behaviour of metal wires on osteoblast differentiation, expressed by alkaline phosphatase (ALP) activity; on fibroblast proliferation, assayed by the 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulphophenil)-2H-tetrazolium-phenazine ethosulphate method; and on keratinocyte viability and migration on the wires, observed by scanning electron microscopy (SEM), were tested. Two types of commercially available wires normally used for orthodontic appliances, with a similar chemical composition (iron, carbon, silicon, chromium, molybdenum, phosphorus, sulphur, vanadium, and nitrogen) but differing in nickel and manganese content, were examined, as well as the joints obtained by electrical resistance welding, traditional soldering, and laser welding. Nickel and chromium, known as possible toxic metals, were also examined using pure nickel- and chromium-plated titanium wires. Segments of each wire, cut into different lengths, were added to each well in which the cells were grown to confluence. The high nickel and chromium content of orthodontic wires damaged both osteoblasts and fibroblasts, but did not affect keratinocytes. Chromium strongly affected fibroblast growth. The joint produced by electrical resistance welding was well tolerated by both osteoblasts and fibroblasts, whereas traditional soldering caused a significant (P < 0.05) decrease in both osteoblast ALP activity and fibroblast viability, and prevented the growth of keratinocytes in vitro. Laser welding was the only joining process well tolerated by all tested cells.

摘要

正畸矫治器在口腔环境中的长期影响以及随后金属的析出情况相对未知。本文提出了一种方法,用于确定各种类型的焊接对体外成骨细胞、成纤维细胞和口腔角质形成细胞生长的影响,而这两种焊接方式都可能导致金属离子的析出。研究了金属丝对成骨细胞分化(通过碱性磷酸酶(ALP)活性表示)、对成纤维细胞增殖(通过3-(4,5-二甲基噻唑-2-基)-5-(3-羧甲氧基苯基)-2-(4-磺基苯基)-2H-四唑-吩嗪乙磺酸盐法测定)以及对金属丝上角质形成细胞活力和迁移(通过扫描电子显微镜(SEM)观察)的细胞行为影响。研究了两种通常用于正畸矫治器的市售金属丝,它们化学成分相似(铁、碳、硅、铬、钼、磷、硫、钒和氮),但镍和锰含量不同,还研究了通过电阻焊、传统焊接和激光焊接获得的接头。还使用纯镀镍和镀铬钛丝研究了已知可能有毒的镍和铬。将每种金属丝切成不同长度的片段,添加到细胞生长至汇合的每个孔中。正畸金属丝中高含量的镍和铬损害了成骨细胞和成纤维细胞,但未影响角质形成细胞。铬强烈影响成纤维细胞的生长。电阻焊接产生的接头对成骨细胞和成纤维细胞均具有良好的耐受性,而传统焊接导致成骨细胞ALP活性和成纤维细胞活力均显著(P < 0.05)下降,并阻止了角质形成细胞在体外的生长。激光焊接是所有测试细胞都能良好耐受的唯一连接工艺。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验