Chang Yin, Wu Hsiu-Mei, Lin Yu-Fong
Institute of Biomedical Engineering, National Yang-Ming University, Department of Radiology, Taipei Veterans General Hospital, 11211, Taiwan, ROC.
Vision Res. 2007 Jan;47(1):71-84. doi: 10.1016/j.visres.2006.09.018. Epub 2006 Nov 3.
Lens tilt and decentration relative to the corneal axis are two of the factors which cause aberration in human eyes. Although many techniques have been developed to quantitatively measure these factors, however, they are mostly confined in 2D observations. To extend the view from 2D to 3D, MR imaging technique becomes a good candidate due to its capability of 3D-image reconstruction and with fairly good spatial resolution for that purpose. In this study a total of six eyes of six young students at this Institute were examined by using a 1.5T MRI machine incorporating with a commercial 3-in. surface coil at Taipei Veterans General Hospital. From a 45 degrees flipped reflective mirror, the subject could focus to a target at a distance of 60 cm from the eye for MR imaging in monocular vision. Quadric surface models were used to fit cornea and lens surfaces in the post image processes. Tilts of the two lens surfaces and the decentration of lens centre with respect to corneal axis were determined through coordinate transformations. One month later, retest was carried out on five of the six subjects. The results show that the average tilts of anterior and posterior lens surfaces, and lens decentration are 3.7+/-2.5 degrees, 3.3+/-1.4 degrees and 0.11+/-0.07 mm (H), -0.06+/-0.38 mm (V), respectively, for the test; 2.1+/-2.4 degrees, 1.9+/-1.8 degrees and -0.02+/-0.28 mm (H), -0.45+/-0.28 mm (V) for the retest. No statistically significant difference (by Wilcoxon Signed Ranks test) is revealed for the tilts of both lens surfaces (p(phia)=0.375, p(phip)=0.225) and for decentration (p(H)=0.343, p(V)=0.345) between test and retest in this longitudinal observation. The surface shapes of the ocular anterior components do not seem to be unified by only one type but ellipsoid, elliptic paraboloid, hyperboloid and paraboloid are all possible. Changes in shape type in the ocular anterior components were also found when measured in a period of one month.
晶状体倾斜以及相对于角膜轴的偏心是导致人眼像差的两个因素。尽管已经开发出许多技术来定量测量这些因素,然而,它们大多局限于二维观察。为了将视角从二维扩展到三维,磁共振成像技术因其三维图像重建能力以及为此目的具有相当好的空间分辨率而成为一个很好的选择。在本研究中,台北荣民总医院使用一台配备商用3英寸表面线圈的1.5T磁共振成像仪对该研究所六名年轻学生的总共六只眼睛进行了检查。通过一个45度翻转的反射镜,受试者可以在单眼视觉下将焦点对准距离眼睛60厘米处的目标进行磁共振成像。在图像后期处理中使用二次曲面模型拟合角膜和晶状体表面。通过坐标变换确定两个晶状体表面的倾斜度以及晶状体中心相对于角膜轴的偏心度。一个月后,对六名受试者中的五名进行了重新测试。结果表明,测试时晶状体前表面和后表面的平均倾斜度以及晶状体偏心度分别为3.7±2.5度、3.3±1.4度和0.11±0.07毫米(水平方向)、-0.06±0.38毫米(垂直方向);重新测试时分别为2.1±2.4度、1.9±1.8度和-0.02±0.28毫米(水平方向)、-0.45±0.28毫米(垂直方向)。在这项纵向观察中,两次测试之间晶状体两个表面的倾斜度(p(phia)=0.375,p(phip)=0.225)和偏心度(p(水平方向)=0.343,p(垂直方向)=0.345)均未显示出统计学上的显著差异。眼前部组件的表面形状似乎并非仅由一种类型统一,而是椭球体、椭圆抛物面、双曲面和抛物面都有可能。在一个月的时间段内进行测量时,还发现眼前部组件的形状类型发生了变化。