Suppr超能文献

全血在与各种钛表面接触时在凝血酶生成中的作用。

The role of whole blood in thrombin generation in contact with various titanium surfaces.

作者信息

Thor Andreas, Rasmusson Lars, Wennerberg Ann, Thomsen Peter, Hirsch Jan-Michael, Nilsson Bo, Hong Jaan

机构信息

Department of Surgical Sciences; Oral & Maxillofacial Surgery, Uppsala University Hospital, SE-751 85 Uppsala, Sweden.

出版信息

Biomaterials. 2007 Feb;28(6):966-74. doi: 10.1016/j.biomaterials.2006.10.020. Epub 2006 Nov 13.

Abstract

Understanding of the thrombotic response (activation of the intrinsic coagulation system followed by platelet activation) from blood components upon contact with a titanium dental implant is important and not fully understood. The aims of this study were to evaluate: (1) the thrombogenic response of whole blood, platelet-rich plasma (PRP) and platelet-poor plasma (PPP) in contact with a highly thrombogenic surface as titanium, (2) the thrombogenic response of clinically used surfaces as hydroxyapatite (HA), machined titanium (mTi), TiO2 grit-blasted titanium (TiOB) and fluoride ion-modified grit-blasted titanium (TiOB-F). An in vitro slide chamber model, furnished with heparin, was used in which whole blood, PRP or PPP came in contact with slides of the test surfaces. After incubation (60 min rotation at 22 rpm in a 37 degrees C water bath), blood/plasma was mixed with EDTA or citrate, further centrifuged at +4 degrees C (2200 g at 10 min). Finally, plasma was collected pending analysis. Whole blood in contact with Ti alloy resulted in the binding of platelets to the material surface and in the generation of thrombin-antithrombin (TAT) complexes. With whole blood TAT levels increased 1000-fold compared with PRP and PPP, in which both almost no increase of TAT could be detected. In addition, the platelet activation showed a similar pattern with a 15-fold higher release of beta-TG in whole blood. In the in vitro chamber model with the clinically relevant materials, the fluoride-modified surface (TiOB-F) showed pronounced TAT generation compared with TiOB, mTi and HA. Similar results were achieved for platelet consumption and activation markers of the intrinsic coagulation system. Taken together these results implicate first that whole blood is necessary for sufficient thrombin generation and platelet activation during placement of implants. Second, a fluoride ion modification seems to augment the thrombogenic properties of titanium.

摘要

了解血液成分与钛制牙科植入物接触时的血栓形成反应(内源性凝血系统激活后血小板激活)很重要,但尚未完全了解。本研究的目的是评估:(1)全血、富血小板血浆(PRP)和贫血小板血浆(PPP)与高度促血栓形成表面(如钛)接触时的血栓形成反应;(2)临床使用的表面(如羟基磷灰石(HA)、机械加工钛(mTi)、TiO₂ 喷砂钛(TiOB)和氟离子改性喷砂钛(TiOB-F))的血栓形成反应。使用配备肝素的体外载玻片室模型,使全血、PRP 或 PPP 与测试表面的载玻片接触。孵育后(在 37℃水浴中以 22 rpm 旋转 60 分钟),将血液/血浆与 EDTA 或柠檬酸盐混合,然后在 +4℃下进一步离心(2200 g 离心 10 分钟)。最后,收集血浆以待分析。与钛合金接触的全血导致血小板与材料表面结合,并产生凝血酶 - 抗凝血酶(TAT)复合物。与 PRP 和 PPP 相比,全血中的 TAT 水平增加了 1000 倍,而 PRP 和 PPP 中几乎检测不到 TAT 的增加。此外,血小板激活呈现出类似的模式,全血中 β-TG 的释放高出 15 倍。在具有临床相关材料的体外室模型中,与 TiOB、mTi 和 HA 相比,氟化物改性表面(TiOB-F)显示出明显的 TAT 生成。对于内源性凝血系统的血小板消耗和激活标志物也获得了类似的结果。综上所述,这些结果首先表明,在植入物放置过程中,全血对于足够的凝血酶生成和血小板激活是必要的。其次,氟离子改性似乎增强了钛的血栓形成特性。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验