Grivas C, Shepherd D P, Eason R W, Laversenne L, Moretti P, Borca C N, Pollnau M
Optoelectronics Research Centre, University of Southampton, Southampton, UK.
Opt Lett. 2006 Dec 1;31(23):3450-2. doi: 10.1364/ol.31.003450.
Fabrication and laser operation of proton-implanted Ti:sapphire buried channel waveguides is reported for the first time to our knowledge. Without any postimplantation annealing of the structures, continuous laser operation near 780 nm was demonstrated at room temperature at an absorbed pump power threshold of 230 mW. Single-transverse-mode laser emission was observed with measured beam propagation factors M(2)(x) and M(2)(y) of 1.5 and 1.2, respectively. An output power of 12.4 mW for 1 W pump power was obtained with an output coupler of 4.6% transmission at the signal wavelength. Higher output powers were measured in waveguides with larger cross sections exhibiting multimode laser emission.
据我们所知,首次报道了质子注入钛宝石掩埋通道波导的制备及激光运行情况。在不对结构进行任何注入后退火处理的情况下,在室温下以230 mW的吸收泵浦功率阈值实现了近780 nm的连续激光运行。观察到单横模激光发射,测得的光束传播因子M(2)(x)和M(2)(y)分别为1.5和1.2。对于1 W的泵浦功率,使用在信号波长处透射率为4.6%的输出耦合器,获得了12.4 mW的输出功率。在具有较大横截面且呈现多模激光发射的波导中测得更高的输出功率。