Grivas C, Shepherd D, May-Smith T, Eason R, Pollnau M
Opt Express. 2005 Jan 10;13(1):210-5. doi: 10.1364/opex.13.000210.
Laser operation of Ti:sapphire rib waveguides fabricated using photolithography and ion beam etching in pulsed laser deposited layers is reported. Polarized laser emission was observed at 792.5 nm with an absorbed pump power threshold of 265 mW, which is more than a factor of 2 lower in comparison to their planar counterparts. Measured beam propagation factors M2x and M2y of 1.3 and 1.2, respectively, indicated single-transverse-mode emission. A quasi-cw output power of 27 mW for an absorbed pump power of 1W and a slope efficiency of 5.3% were obtained using an output coupler of 4.6% transmission with a pump duty cycle of 8%.
报道了在脉冲激光沉积层中使用光刻和离子束蚀刻制造的钛宝石肋形波导的激光操作。在792.5nm处观察到偏振激光发射,吸收泵浦功率阈值为265mW,与平面波导相比降低了两倍多。测量得到的光束传播因子M2x和M2y分别为1.3和1.2,表明是单横向模式发射。使用透射率为4.6%的输出耦合器和8%的泵浦占空比,在吸收泵浦功率为1W时获得了27mW的准连续输出功率和5.3%的斜率效率。