Su Shi, Chen Hongwei, Teakle Philip, Xue Sheng
CSIRO Exploration and Mining, P.O. Box 883, Kenmore, Qld 4069, Australia.
J Environ Manage. 2008 Jan;86(1):44-62. doi: 10.1016/j.jenvman.2006.11.025. Epub 2007 Jan 18.
Coal mine methane (CMM) is not only a greenhouse gas but also a wasted energy resource if not utilised. Underground coal mining is by far the most important source of fugitive methane emissions, and approximately 70% of all coal mining related methane is emitted to the atmosphere through mine ventilation air. Therefore, research and development on mine methane mitigation and utilisation now focuses on methane emitted from underground coal mines, in particular ventilation air methane (VAM) capture and utilisation. To date, most work has focused on the oxidation of very low concentration methane. These processes may be classified based on their combustion kinetic mechanisms into thermal oxidation and catalytic oxidation. VAM mitigation/utilisation technologies are generally divided into two basic categories: ancillary uses and principal uses. However, it is possible that the characteristics of ventilation air flows, for example the variations in methane concentration and the presence of certain compounds, which have not been reported so far, could make some potential VAM mitigation and utilisation technologies unfeasible if they cannot cope with the characteristics of mine site ventilation air flows. Therefore, it is important to understand the characteristics of mine ventilation air flows. Moreover, dust, hydrogen sulphide, sulphur dioxide, and other possible compounds emitted through mine ventilation air into the atmosphere are also pollutants. Therefore, this paper presents mine-site experimental results on the characteristics of mine ventilation air flows, including methane concentration and its variations, dust loadings, particle size, mineral matter of the dust, and other compounds in the ventilation air flows. The paper also discusses possible correlations between ventilation air characteristics and underground mining activities.
煤矿瓦斯(CMM)不仅是一种温室气体,而且如果不加以利用,还是一种被浪费的能源资源。到目前为止,地下煤矿开采是逸散性甲烷排放的最重要来源,所有与煤矿开采相关的甲烷中,约70%通过矿井通风排放到大气中。因此,目前关于煤矿瓦斯减排与利用的研发工作主要集中在地下煤矿排放的瓦斯,特别是对通风瓦斯(VAM)的捕获与利用。迄今为止,大多数工作都集中在极低浓度甲烷的氧化方面。这些过程可根据其燃烧动力学机制分为热氧化和催化氧化。VAM减排/利用技术一般分为两大类:辅助用途和主要用途。然而,通风气流的特性,例如甲烷浓度的变化以及某些化合物的存在(目前尚未见报道),可能会使一些潜在的VAM减排与利用技术在无法应对矿场通风气流特性时变得不可行。因此,了解矿场通风气流的特性非常重要。此外,通过矿井通风排放到大气中的粉尘、硫化氢、二氧化硫以及其他可能的化合物也是污染物。因此,本文介绍了矿场关于通风气流特性的实验结果,包括甲烷浓度及其变化、粉尘负荷、粒径、粉尘中的矿物质以及通风气流中的其他化合物。本文还讨论了通风气流特性与地下开采活动之间可能存在的相关性。