Suppr超能文献

使用EGS4蒙特卡罗代码对用于(60)Co和(137)Cs未展开脉冲高度分布的球形电离室的空气比释动能响应进行研究。

Investigation of the air kerma response of spherical ionization chambers for unfolded pulse height distributions of (60)Co and (137)Cs using the EGS4 Monte Carlo code.

作者信息

Chun Kook Jin, Yoo Gwang Ho

机构信息

Health Metrology Group, Division of Metrology for Quality Life, Korea Research Institute of Standards and Science, Yuseong-Gu, Daejon 305-340, Korea.

出版信息

J Radiat Res. 2007 Sep;48(5):385-95. doi: 10.1269/jrr.07003. Epub 2007 Aug 3.

Abstract

Data required for the determination of the absolute air kerma rate for (60)Co and (137)Cs gamma-rays using spherical cavity chambers were calculated using the EGS4 Monte Carlo system. Mass energy-absorption coefficient ratio and the stopping power ratio were calculated for a 10 cm(3) primary standard graphite-walled ionization chamber from the unfolded energy pulse height distributions of (60)Co and (137)Cs sources. Wall correction factors and non-uniformity correction factors for two graphite and one air equivalent plastic walled ionization chambers were also calculated with EGS4 code. The wall correction factors were compared with those determined by an experimental extrapolation method. To check the accuracy of the calculations the results were compared with those obtained from other primary standard laboratories such as NIST and NRCC. For a 10 cm(3) graphite ionization chamber, the mass energy-absorption coefficient ratios were 0.99917 for (60)Co and 1.0004 for (137)Cs. The values differed by 0.02-0.05 % for (60)Co and 0.11 % for (137)Cs from those of two laboratories. The stopping power ratios were 0.99984 for (60)Co and 1.0087 for (137)Cs. Comparison with NIST values showed differences of 0.06 % for (60)Co and 0.04 % for (137)Cs. The wall correction factors were obtained and they were different by 0.6-1.1 % for (60)Co and (137)Cs compared to the experimental linear extrapolation method. These values were compared with Monte Carlo derived values from other laboratories. The non-uniformity correction factors were also calculated and they differed from unity, the traditional value used in most standard national metrology laboratories.

摘要

使用EGS4蒙特卡罗系统计算了使用球形空腔电离室确定钴 - 60和铯 - 137γ射线的绝对空气比释动能率所需的数据。根据钴 - 60和铯 - 137源展开后的能量脉冲高度分布,计算了一个10立方厘米的原级标准石墨壁电离室的质能吸收系数比和阻止本领比。还使用EGS4代码计算了两个石墨壁和一个空气等效塑料壁电离室的壁修正因子和非均匀性修正因子。将壁修正因子与通过实验外推法确定的因子进行了比较。为检验计算的准确性,将结果与其他原级标准实验室(如美国国家标准与技术研究院和加拿大国家研究理事会)获得的结果进行了比较。对于一个10立方厘米的石墨电离室,钴 - 60的质能吸收系数比为0.99917,铯 - 137的为1.0004。与两个实验室的值相比,钴 - 60的值相差0.02 - 0.05%,铯 - 137的值相差0.11%。钴 - 60的阻止本领比为0.99984,铯 - 137的为1.0087。与美国国家标准与技术研究院的值相比,钴 - 60的差异为0.06%,铯 - 137的差异为0.04%。获得了壁修正因子,与实验线性外推法相比,钴 - 60和铯 - 137的壁修正因子相差0.6 - 1.1%。将这些值与其他实验室通过蒙特卡罗方法得出的值进行了比较。还计算了非均匀性修正因子,其与大多数国家计量标准实验室使用的传统值“1”不同。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验