Lally Sarah, Mackenzie Paul, LeMaitre Christine L, Freemont Tony J, Saunders Brian R
Manchester Materials Science Centre, School of Materials, The University of Manchester, Grosvenor Street, Manchester, M1 7HS, UK.
J Colloid Interface Sci. 2007 Dec 15;316(2):367-75. doi: 10.1016/j.jcis.2007.08.030. Epub 2007 Aug 19.
pH-responsive microgels are crosslinked polymer particles that swell when the pH approaches the pK(a) of the ionic monomer incorporated within the particles. In recent work from our group it was demonstrated that the mechanical properties of degenerated intervertebral discs (IVDs) could be restored to normal values by injection of poly(EA/MAA/BDDA) (ethylacrylate, methacrylic acid and butanediol diacrylate) microgel dispersions [J.M. Saunders, T. Tong, C.L. Le Maitre, T.J. Freemont, B.R. Saunders, Soft Matter 3 (2007) 486]. In this work we report the pH dependent swelling and rheological properties of poly(MMA/MAA/EGDMA) (methylmethacrylate and ethyleneglycol dimethacrylate) microgel dispersions. This system was investigated because it contains monomers that are already used as biomaterials. The poly(MMA/MAA/EGDMA) particles exhibit pH-triggered volume swelling ratios of up to ca. 250. The swelling onset for these particles occurs at pH values greater than ca. 6.0. A pK(a) for these particles of ca. 6.7 is consistent with titration and swelling data. Fluid-to-gel phase diagrams for concentrated poly(MMA/MAA/EGDMA) dispersions were determined as a function of polymer volume fraction and pH using tube-inversion measurements. The rheological properties for the gelled microgel dispersions were investigated using dynamic rheology measurements. The elastic modulus data for the poly(MMA/MAA/EGDMA) gelled dispersions were compared to data for poly(EA/MAA/BDDA) microgels. A similar pH-dependence for the elastic modulus was apparent. The maximum elastic modulus was achieved at a pH of about 7.0. The elastic modulus is an exponentially increasing function of polymer volume fraction at pH 7.0. Preliminary cell challenge experimental data are reported that indicate that gelled poly(MMA/MAA/EGDMA) microgel dispersions are biocompatible with cells from human intervertebral discs. However, the duration over which these experiments could be performed was limited by gradual redispersion of the gelled microgel dispersions. Based on the results presented it is suggested that poly(MMA/MAA/EGDMA) microgel would be a good candidate as a biomaterial for structural support of soft connective tissues.
pH响应性微凝胶是交联聚合物颗粒,当pH接近颗粒内所含离子单体的pK(a)时会发生溶胀。在我们小组最近的工作中,已证明通过注射聚(EA/MAA/BDDA)(丙烯酸乙酯、甲基丙烯酸和丁二醇二丙烯酸酯)微凝胶分散体,退变椎间盘(IVD)的力学性能可恢复到正常值[J.M.桑德斯、T.童、C.L.勒梅特尔、T.J.弗里蒙特、B.R.桑德斯,《软物质》3(2007年)486]。在这项工作中,我们报告了聚(MMA/MAA/EGDMA)(甲基丙烯酸甲酯和乙二醇二甲基丙烯酸酯)微凝胶分散体的pH依赖性溶胀和流变性能。对该体系进行研究是因为它包含已用作生物材料的单体。聚(MMA/MAA/EGDMA)颗粒表现出高达约250的pH触发体积溶胀率。这些颗粒的溶胀起始发生在pH值大于约6.0时。这些颗粒的pK(a)约为6.7,这与滴定和溶胀数据一致。使用试管倒置测量法测定了浓聚(MMA/MAA/EGDMA)分散体的流体-凝胶相图,该相图是聚合物体积分数和pH的函数。使用动态流变学测量法研究了凝胶化微凝胶分散体的流变性能。将聚(MMA/MAA/EGDMA)凝胶化分散体的弹性模量数据与聚(EA/MAA/BDDA)微凝胶的数据进行了比较。弹性模量存在类似的pH依赖性。在pH约为7.0时达到最大弹性模量。在pH 7.0时,弹性模量是聚合物体积分数的指数增长函数。报告了初步的细胞挑战实验数据,表明凝胶化的聚(MMA/MAA/EGDMA)微凝胶分散体与人类椎间盘细胞具有生物相容性。然而,这些实验能够进行的持续时间受到凝胶化微凝胶分散体逐渐再分散的限制。基于所呈现的结果,建议聚(MMA/MAA/EGDMA)微凝胶作为软结缔组织结构支撑的生物材料将是一个很好的候选者。