Nam Jin, Santore Maria M
Department of Polymer Science and Engineering, 120 Governors Drive, University of Massachusetts, Amherst, Massachusetts 01003, USA.
Langmuir. 2007 Oct 9;23(21):10650-60. doi: 10.1021/la7017709. Epub 2007 Sep 7.
We investigate the kinetics of spreading and adhesion between polymer vesicles decorated with avidin and biotin, held in micropipettes to maintain fixed tension and suppress membrane bending fluctuations. In this study, the density of avidin (actually Neutravidin) and biotin was varied, but was always sufficiently high so that lateral diffusion in the membrane was unimportant to the adhesive mechanism or rate. For a stunning result, we report a concentration-dependent distinction between adhesion and spreading: At low surface densities of avidin and biotin, irreversible vesicle adhesion is strong enough to break the membrane when vesicle separation is attempted, yet there is no spreading or "wetting". By this we mean that there is no development of an adhesion plaque beyond the initial radius of contact and there is no development of a meaningful contact angle. Conversely, at 30% functionalization and greater, membrane adhesion is manifest through a spreading process in which the vesicle held at lower tension partially engulfs the second vesicle, and the adhesion plaque grows, as does the contact angle. Generally, when spreading occurs, it starts abruptly, following a latent contact period whose duration decreases with increasing membrane functionality. A nucleation-type rate law describes the latency period, determined by competition between bending and sticking energy. The significance of this result is that, not only are membrane mechanics important to the development of adhesion in membranes of nanometer-scale thickness, mechanics can dominate and even mask adhesive features such as contact angle. This renders contact angle analyses inappropriate for some systems. The results also suggest that there exist large regions of parameter space where adhesive polymeric vesicles will behave qualitatively differently from their phospholipid counterparts. This motivates different strategies to design polymeric vesicles for applications such as targeted drug delivery and biomimetic scavengers.
我们研究了用抗生物素蛋白和生物素修饰的聚合物囊泡之间的扩散和粘附动力学,这些囊泡被固定在微量移液器中以维持固定张力并抑制膜弯曲波动。在本研究中,抗生物素蛋白(实际上是中性抗生物素蛋白)和生物素的密度有所变化,但始终足够高,以至于膜中的横向扩散对粘附机制或速率并不重要。令人惊讶的是,我们报告了粘附与扩散之间浓度依赖性的区别:在抗生物素蛋白和生物素的低表面密度下,当试图分离囊泡时,不可逆的囊泡粘附力很强,足以使膜破裂,但没有扩散或“润湿”现象。我们的意思是,除了初始接触半径外,没有形成粘附斑,也没有形成有意义的接触角。相反,在功能化程度达到30%及更高时,膜粘附通过扩散过程表现出来,其中处于较低张力的囊泡会部分吞噬第二个囊泡,粘附斑会增大,并伴随着接触角的增大。一般来说,当发生扩散时,它会在一段潜在接触期后突然开始,该潜在接触期的持续时间随着膜功能化程度的增加而缩短。成核型速率定律描述了这个潜伏期,它由弯曲能和粘附能之间的竞争决定。这一结果的意义在于,不仅膜力学对纳米级厚度膜中粘附的发展很重要,力学还可以主导甚至掩盖诸如接触角等粘附特征。这使得接触角分析不适用于某些系统。结果还表明,存在大片参数空间区域,在这些区域中,粘附性聚合物囊泡的行为与其磷脂对应物在性质上有很大不同。这为设计用于靶向药物递送和仿生清除剂等应用的聚合物囊泡提供了不同的策略。