Austin Travis M, Li Liren, Pullan Andrew J, Cheng Leo K
Bioengineering Institute, The University of Auckland, Private Bag 92019, Auckland 1142, New Zealand.
Biomed Eng Online. 2007 Oct 22;6:39. doi: 10.1186/1475-925X-6-39.
Digestive diseases are difficult to assess without using invasive measurements. Non-invasive measurements of body surface electrical and magnetic activity resulting from underlying gastro-intestinal activity are not widely used, in large due to their difficulty in interpretation. Mathematical modelling of the underlying processes may help provide additional information. When modelling myoelectrical activity, it is common for the electrical field to be represented by equivalent dipole sources. The gastrointestinal system is comprised of alternating layers of smooth muscle (SM) cells and Interstitial Cells of Cajal (ICC). In addition the small intestine has regions of high curvature as the intestine bends back upon itself. To eventually use modelling diagnostically, we must improve our understanding of the effect that intestinal structure has on dipole vector behaviour.
Normal intestine electrical behaviour was simulated on simple geometries using a monodomain formulation. The myoelectrical fields were then represented by their dipole vectors and an examination on the effect of structure was undertaken. The 3D intestine model was compared to a more computationally efficient 1D representation to determine the differences on the resultant dipole vectors. In addition, the conductivity values and the thickness of the different muscle layers were varied in the 3D model and the effects on the dipole vectors were investigated.
The dipole vector orientations were largely affected by the curvature and by a transmural gradient in the electrical wavefront caused by the different properties of the SM and ICC layers. This gradient caused the dipoles to be oriented at an angle to the principal direction of electrical propagation. This angle increased when the ratio of the longitudinal and circular muscle was increased or when the the conductivity along and across the layers was increased. The 1D model was able to represent the geometry of the small intestine and successfully captured the propagation of the slow wave down the length of the mesh, however, it was unable to represent transmural diffusion within each layer, meaning the equivalent dipole sources were missing a lateral component and a reduced magnitude when compared to the full 3D models.
The structure of the intestinal wall affected the potential gradient through the wall and the orientation and magnitude of the dipole vector. We have seen that the models with a symmetrical wall structure and extreme anisotropic conductivities had similar characteristics in their dipole magnitudes and orientations to the 1D model. If efficient 1D models are used instead of 3D models, then both the differences in magnitude and orientation need to be accounted for.
不采用侵入性测量方法很难评估消化系统疾病。对由潜在胃肠活动产生的体表电活动和磁活动进行非侵入性测量尚未得到广泛应用,这在很大程度上是由于其难以解释。对潜在过程进行数学建模可能有助于提供更多信息。在对肌电活动进行建模时,通常用电偶极源来表示电场。胃肠道系统由平滑肌(SM)细胞和 Cajal 间质细胞(ICC)的交替层组成。此外,小肠在自身弯曲处有高曲率区域。为了最终将建模用于诊断,我们必须更好地理解肠道结构对偶极矢量行为的影响。
使用单域公式在简单几何形状上模拟正常肠道电行为。然后用电偶极矢量表示肌电电场,并研究结构的影响。将三维肠道模型与计算效率更高的一维模型进行比较,以确定所得偶极矢量的差异。此外,在三维模型中改变不同肌肉层的电导率值和厚度,并研究其对偶极矢量的影响。
偶极矢量方向在很大程度上受曲率以及由 SM 层和 ICC 层不同特性引起的电波前跨壁梯度影响。这种梯度导致偶极与电传播的主方向成一定角度。当纵肌与环肌的比例增加或层内和层间的电导率增加时,这个角度会增大。一维模型能够表示小肠的几何形状,并成功捕捉到慢波沿网格长度的传播,然而,它无法表示每层内的跨壁扩散,这意味着与完整的三维模型相比,等效偶极源缺少横向分量且幅度减小。
肠壁结构影响穿过肠壁的电位梯度以及偶极矢量的方向和大小。我们已经看到,具有对称壁结构和极端各向异性电导率的模型在偶极大小和方向上与一维模型具有相似的特征。如果使用高效的一维模型而非三维模型,那么大小和方向上的差异都需要考虑在内。