Vilkomerson D, Lyons D
EchoCath Inc., Princeton, NJ.
IEEE Trans Ultrason Ferroelectr Freq Control. 1997;44(2):496-504. doi: 10.1109/58.585134.
Catheters and other interventional medical devices are presently guided by X-ray imaging, despite the advantages of ultrasound imaging over X-ray imaging in cost, safety, and availability. X-ray imaging is used because ultrasound reflects specularly from catheters and similar devices; their visibility is highly angle-dependent. With an omni-directional receiver mounted on a device, the receiver's location in the ultrasound image can be deduced from knowing which acoustic ray struck the receiver and the time from transmission of the imaging pulse to its reception by the receiver. This information is independent of specular reflection. The location of the device can then be indicated in the ultrasound image by an arrow pointing to the sensor, making possible ultrasound guidance of these devices. This paper describes the technical and practical considerations in the design and construction of the device-mounted receiver and associated electronics, and describes some clinical uses.
尽管超声成像在成本、安全性和可用性方面优于X射线成像,但目前导管和其他介入性医疗设备仍由X射线成像引导。使用X射线成像是因为超声会从导管和类似设备上发生镜面反射;它们的可见性高度依赖角度。通过将全向接收器安装在设备上,根据知道哪条声线击中了接收器以及成像脉冲从发射到被接收器接收的时间,可以推断出接收器在超声图像中的位置。此信息与镜面反射无关。然后可以通过指向传感器的箭头在超声图像中指示设备的位置,从而实现这些设备的超声引导。本文描述了安装在设备上的接收器及相关电子设备的设计和构造中的技术和实际考虑因素,并描述了一些临床应用。