Ariyaprakai Suwimon, Dungan Stephanie R
Department of Food Science and Technology, University of California, Davis, One Shields Avenue, Davis, California 95616, USA.
Langmuir. 2008 Apr 1;24(7):3061-9. doi: 10.1021/la703204c. Epub 2008 Mar 7.
It is often proposed that oil solubilization in anionic and nonionic micelles proceeds by different mechanisms, with diffusion of the oil molecule thought to control the former, and the latter interfacially controlled. In order to investigate this hypothesis, the effect of aqueous phase viscosity, salt, and surfactant concentration during the solubilization process was studied. The progressive decrease in average droplet size of nearly monodisperse emulsions during solubilization in SDS or Tween 20 micellar solutions was monitored by light scattering, and the change in turbidity was measured by UV-vis spectrophotometer. The solubilization rates were analyzed using a population balance approach to calculate the mass transfer coefficients. Increasing the aqueous viscosity by adding sucrose reduced the mass transfer coefficients of n-tetradecane and n-dodecane but had a smaller effect on n-hexadecane. The strong dependence of the solubilization rate for the shorter chain length alkanes on aqueous viscosity supported a mechanism in which the oil undergoes molecular diffusion before being taken up by micelles. The dependence of the solubilization kinetics on surfactant concentration appeared consistent with this mechanism but yielded a slower micellar uptake rate than previously predicted theoretically. As the solute chain length increased in nonionic surfactant solutions, an interfacial mechanism mediated by micelles appeared to contribute substantially to the overall rate. Addition of salt only slightly increased the solubilization rate of n-hexadecane in SDS solutions and, thus, indicated a weak role of electrostatic interactions for ionic surfactants on the overall mechanism.
人们常认为,油在阴离子和非离子胶束中的增溶作用是通过不同机制进行的,油分子的扩散被认为控制着前者,而后者则受界面控制。为了研究这一假设,研究了增溶过程中水相粘度、盐和表面活性剂浓度的影响。通过光散射监测在SDS或吐温20胶束溶液中增溶过程中近单分散乳液平均液滴尺寸的逐渐减小,并通过紫外可见分光光度计测量浊度的变化。使用总体平衡方法分析增溶速率以计算传质系数。通过添加蔗糖增加水相粘度会降低正十四烷和正十二烷的传质系数,但对正十六烷的影响较小。较短链长烷烃的增溶速率对水相粘度的强烈依赖性支持了一种机制,即油在被胶束吸收之前经历分子扩散。增溶动力学对表面活性剂浓度的依赖性似乎与该机制一致,但胶束摄取速率比先前理论预测的要慢。随着非离子表面活性剂溶液中溶质链长的增加,由胶束介导的界面机制似乎对总速率有很大贡献。添加盐只会略微增加正十六烷在SDS溶液中的增溶速率,因此表明离子表面活性剂的静电相互作用在整体机制中的作用较弱。