Koutsiaris Aristotle G, Tachmitzi Sophia V, Batis Nick, Kotoula Maria G, Karabatsas Constantinos H, Tsironi Evagelia, Chatzoulis Dimitrios Z
Department of Medical Laboratories, School of Health Sciences, Technological Educational Institute of Larissa, Larissa, Greece.
Biorheology. 2007;44(5-6):375-86.
Understanding the mathematical relationships of volume blood flow and wall shear stress with respect to microvessel diameter is necessary for the study of vascular design. Here, for the first time, volume flow and wall shear stress were quantified from axial red blood cell velocity measurements in 104 conjunctival microvessels of 17 normal human volunteers. Measurements were taken with a slit lamp based imaging system from the post capillary side of the bulbar conjunctiva in microvessel diameters ranging from 4 to 24 micrometers. The variation of the velocity profile with diameter was taken into account by using a profile factor function. Volume flow ranged from 5 to 462 pl/s with a mean value of 102 pl/s and gave a second power law best fitting line (r=0.97) deviating significantly from the third power law relation with diameter. The estimated wall shear stress declined hyperbolically (r=0.93) from a maximum of 9.55 N/m(2) at the smallest capillaries, down to a minimum of 0.28 N/m(2) at the higher diameter post capillary venules. The mean wall shear stress value for all microvessels was 1.54 N/m(2).
了解容积血流量和壁面剪应力与微血管直径之间的数学关系对于血管设计研究是必要的。在此,首次从17名正常人类志愿者的104根结膜微血管的轴向红细胞速度测量中对容积流量和壁面剪应力进行了量化。使用基于裂隙灯的成像系统,从球结膜毛细血管后段对直径范围为4至24微米的微血管进行测量。通过使用剖面因子函数考虑了速度剖面随直径的变化。容积流量范围为5至462皮升/秒,平均值为102皮升/秒,并给出了与直径的三次方定律关系显著偏离的二次方定律最佳拟合线(r = 0.97)。估计的壁面剪应力呈双曲线下降(r = 0.93),从最小毛细血管处的最大值9.55 N/m²下降到较高直径毛细血管后微静脉处的最小值0.28 N/m²。所有微血管的平均壁面剪应力值为1.54 N/m²。