Bacher C, Olsen P M, Bertelsen P, Sonnergaard J M
Department of Pharmaceutics and Analytical Chemistry, Faculty of Pharmaceutical Sciences, University of Copenhagen, Universitetsparken 2, Copenhagen, Denmark.
Int J Pharm. 2008 Jun 24;358(1-2):69-74. doi: 10.1016/j.ijpharm.2008.02.013. Epub 2008 Feb 17.
The bulk properties, compactibility and compressibility of granules produced by wet and dry granulation were compared applying a rotary tablet press, three different morphological forms of calcium carbonate and two particle sizes of sorbitol. Granules from both granulation methods possessed acceptable flow properties; however, the ground (Mikhart) and cubic (Scoralite) calcium carbonate demonstrated better die-filling abilities in the tablet press than the scalenhedral calcium carbonate (Sturcal). The wet processed granules showed in general larger compression properties. This was explained as these granules were mechanical stronger and had a higher initial porosity. In some cases, a large particle surface area of calcium carbonate and sorbitol resulted in a small, insignificant improvement of the consolidation characteristics. A correlation between the compression and compaction characteristics was demonstrated.
使用旋转式压片机,比较了由湿法制粒和干法制粒制备的颗粒的堆积性质、可压性和压缩性,采用了三种不同形态的碳酸钙和两种粒径的山梨醇。两种制粒方法得到的颗粒均具有可接受的流动性;然而,研磨状(Mikhart)和立方状(Scoralite)碳酸钙在压片机中的填模能力优于斜方柱状碳酸钙(Sturcal)。湿法制粒得到的颗粒通常表现出更大的压缩性能。这可以解释为这些颗粒机械强度更高且初始孔隙率更高。在某些情况下,碳酸钙和山梨醇的大颗粒表面积导致固结特性有微小的、不显著的改善。证明了压缩和压实特性之间的相关性。