de Waard H, Hinrichs W L J, Frijlink H W
Department of Pharmaceutical Technology and Biopharmacy, University of Groningen, Antonius Deusinglaan 1, 9713 AV Groningen, The Netherlands.
J Control Release. 2008 Jun 4;128(2):179-83. doi: 10.1016/j.jconrel.2008.03.002. Epub 2008 Mar 7.
To improve the dissolution behavior of lipophilic drugs, a novel bottom-up process based upon freeze drying which allows for the production of nanocrystalline particles was developed: "controlled crystallization during freeze drying". This novel process could strongly increase the dissolution behavior of fenofibrate. For example at a drug load of 30% w/w, 80% of the drug dissolved within 10 min from tablets prepared from the controlled crystallized dispersions, while from tablets prepared from the physical mixture only 50% was dissolved after 120 min. Furthermore it was found that faster freezing or using a solution with a lower water/tertiary butyl alcohol (TBA) ratio resulted in faster dissolution, indicating that the crystalline dispersions contained smaller crystals. Crystallization of the drug could occur during freezing or during drying. When crystallization occurs during freezing, faster freezing or using solutions with a lower water/TBA ratio results in the formation of more nuclei and consequently smaller crystals. When crystallization occurs during drying, faster freezing or using solutions with a higher water/TBA ratio results in the formation of smaller solvent crystals and therefore smaller interstitial spaces which contain the freeze-concentrated fraction. Since crystallization occurs in the freeze-concentrated fraction and the size of the crystals are limited to the size of the interstitial spaces, smaller crystals are formed in these situations.
为改善亲脂性药物的溶出行为,开发了一种基于冷冻干燥的新型自下而上的方法,该方法可用于制备纳米晶颗粒:“冷冻干燥过程中的控制结晶”。这种新方法可显著提高非诺贝特的溶出行为。例如,在药物负载量为30% w/w时,从由控制结晶分散体制备的片剂中,80%的药物在10分钟内溶解,而从物理混合物制备的片剂中,120分钟后只有50%溶解。此外,还发现更快的冷冻速度或使用水/叔丁醇(TBA)比例更低的溶液会导致更快的溶解,这表明结晶分散体中含有更小的晶体。药物的结晶可在冷冻过程中或干燥过程中发生。当在冷冻过程中发生结晶时,更快的冷冻速度或使用水/TBA比例更低的溶液会导致形成更多的晶核,从而形成更小的晶体。当在干燥过程中发生结晶时,更快的冷冻速度或使用水/TBA比例更高的溶液会导致形成更小的溶剂晶体,因此含有冷冻浓缩部分的间隙空间更小。由于结晶发生在冷冻浓缩部分,且晶体尺寸受间隙空间尺寸限制,在这些情况下会形成更小的晶体。