Kermani Omid, Fabian Will, Lubatschowski Holger
Augenklinik am Neumarkt, Schildergasse 107-109, Köln, Germany.
Am J Ophthalmol. 2008 Jul;146(1):42-5. doi: 10.1016/j.ajo.2008.03.003. Epub 2008 Apr 24.
To determine the usefulness of optical coherence tomography (OCT) as a tool in guiding the femtosecond (fs) laser in the creation of a sub-Bowman keratomileusis (SBK) flap in human eyes.
A nonrandomized case series.
In a private research laboratory setting, we performed an in vitro investigation on human autopsy eyes. Five human cadaver eyes, unsuitable for transplantation, underwent flap creation with a fs laser. The laser procedure was controlled in real-time with an OCT system (Thorlabs HL AG, Luebeck, Germany) to ensure that the cut was placed just underneath the Bowman layer. The fs laser worked at a repetition rate of 10 MHz with a single-pulse duration of < 400 fs (pulse energy in the nanoJoule range). As a control, all eyes underwent histologic dissection (toluidine blue) and were examined using light microscopy (LM).
Video monitoring of the flap creation supported the feasibility of real-time OCT monitoring of the fs laser flap creation process. A clear distinction of the corneal epithelium was possible in all eyes. The Bowman membrane was not identified in all donor eyes at the given resolution of the OCT used in this study. Still, LM examination confirmed that the real-time monitoring assured a positioning of the cutting plane at minimum distance underneath the Bowman layer.
This small laboratory test offers evidence that real-time OCT monitoring of creation of a SBK flap using a fs laser is possible, thus ensuring that the flap is created at the proper depth.
确定光学相干断层扫描(OCT)作为一种工具在引导飞秒(fs)激光为人类眼睛制作准分子激光上皮下角膜磨镶术(SBK)瓣中的作用。
非随机病例系列。
在一个私人研究实验室环境中,我们对人类尸眼进行了体外研究。五只不适用于移植的人类尸体眼接受了飞秒激光制作瓣的操作。激光手术由一个OCT系统(德国吕贝克的Thorlabs HL AG)进行实时控制,以确保切口位于Bowman层正下方。飞秒激光以10 MHz的重复频率工作,单脉冲持续时间<400 fs(脉冲能量在纳焦耳范围内)。作为对照,所有眼睛都进行了组织学解剖(甲苯胺蓝染色)并使用光学显微镜(LM)进行检查。
瓣制作过程的视频监测支持了对飞秒激光瓣制作过程进行实时OCT监测的可行性。在所有眼睛中都能清晰区分角膜上皮。在本研究使用的OCT给定分辨率下,并非所有供体眼中都能识别出Bowman膜。尽管如此,光学显微镜检查证实实时监测确保了切割平面定位在Bowman层下方的最小距离处。
这项小型实验室测试提供了证据,表明使用飞秒激光制作SBK瓣时进行实时OCT监测是可行的,从而确保瓣在适当深度制作。