Mishra R K, Mishra R, Kaushik C P, Tyagi A K, Tomar B S, Das D, Raj Kanwar
Waste Management Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085, India.
J Hazard Mater. 2009 Jan 30;161(2-3):1450-3. doi: 10.1016/j.jhazmat.2008.04.122. Epub 2008 May 4.
The present manuscript describes the preparation, characterization and electrical behavior of sodium borosilicate glasses with varying concentrations of BaO, while maintaining the SiO(2):B(2)O(3):Na(2)O ratios constant for all the samples. The effect of BaO substitution on the ionic conductivity of glasses was studied by ac impedance analyzer, below the glass transition temperature. The diffusion coefficient (D) of each sample has been determined from the values of electrical conductivity and density. The activation energy for sodium ion transport has been calculated from the values of diffusion coefficients at different temperatures. The electrical properties of the modified glass have been explained on the basis of the structural factor.
本手稿描述了不同BaO浓度的硼硅酸钠玻璃的制备、表征及电学行为,同时保持所有样品的SiO₂:B₂O₃:Na₂O比例恒定。通过交流阻抗分析仪在玻璃转变温度以下研究了BaO替代对玻璃离子电导率的影响。根据电导率和密度值确定了每个样品的扩散系数(D)。根据不同温度下的扩散系数值计算了钠离子传输的活化能。基于结构因素对改性玻璃的电学性能进行了解释。