Department of Food Science and Technology, University of Georgia, Athens, Gerogia 30602, USA.
Biotechnol Bioeng. 1992 Apr 15;39(9):960-7. doi: 10.1002/bit.260390911.
The objective of this study was to develop a continuous hydrolysis process for the enzymatic saccharification of liquefied corn starch using a membrane reactor. A residence time distribution study confirmed that the membrane reactor could be modeled as a simple continuous stirred tank reactor (CSTR). Kinetic studies indicated that the continuous reactor operated in the first-order region with respect to substrate concentration at substrate concentrations greater than 200 g/L. At a residence time of 1 h and an enzyme concentration of 1 g/L, the maximum reaction velocity (V(m)) was 3.86 g glucose/L min and the apparent Michaelis constant (K(m) (')) was 562 g/L. The K(m) (') value for the continuous reactor was 2-7 times greater than that obtained in a batch reactor.Kinetic data were fit to a model based on the Michaelis-Menten rate expression and the design equation for a CSTR. Application of the model at low reactor space times was successful. At space times of 6 min or less, the model predicted the reactor's performance reasonably well. Additional work on the detection and quantitation of reversion products formed by glucoamylase is required. Isolation, detection, and quantitation of reversion products by HPLC was difficult. Detailed analysis on the formation of these reversion products could lead to better reactor designs in the future.
本研究的目的是开发一种连续水解工艺,使用膜反应器对液化玉米淀粉进行酶糖化。停留时间分布研究证实,膜反应器可以模拟为简单的连续搅拌釜式反应器(CSTR)。动力学研究表明,在底物浓度大于 200 g/L 时,连续反应器在底物浓度下呈一级反应区域。在停留时间为 1 h 和酶浓度为 1 g/L 的情况下,最大反应速度(V(m))为 3.86 g 葡萄糖/L min,表观米氏常数(K(m)('))为 562 g/L。连续反应器的 K(m)(')值比分批反应器中获得的值大 2-7 倍。动力学数据符合基于米氏-门坦速率表达式和 CSTR 设计方程的模型。该模型在低反应器空间时间下的应用是成功的。在空间时间为 6 分钟或更短的情况下,该模型可以很好地预测反应器的性能。需要进一步研究检测和定量由糖化酶形成的逆反应产物。通过 HPLC 检测、分离和定量这些逆反应产物很困难。对这些逆反应产物形成的详细分析可以为未来更好的反应器设计提供指导。