Suppr超能文献

城市垃圾焚烧炉烟囱处颗粒物的粒径分布和数量浓度。

Size distribution and number concentration of particles at the stack of a municipal waste incinerator.

作者信息

Buonanno G, Ficco G, Stabile L

机构信息

DiMSAT - University of Cassino, via Di Biasio 43, 03043 Cassino, FR, Italy.

出版信息

Waste Manag. 2009 Feb;29(2):749-55. doi: 10.1016/j.wasman.2008.06.029. Epub 2008 Sep 7.

Abstract

A large number of particles and gaseous products are generated by waste combustion processes. Of particular importance are the ultrafine particles (less than 0.1 microm in aerodynamic diameter) that are emitted in large quantities from all the combustion sources. Recent findings of toxicological and epidemiological studies indicate that fine and ultrafine particles could represent health and environmental risks. Quantifying particulate emissions from combustion sources is important: (i) to examine the source status in compliance with regulations; (ii) to create inventories of such emissions at local, regional and national levels, for developing appropriate management and control strategies in relation to air quality; (iii) to predict ambient air quality in the areas involved at the source and (iv) to perform source apportionment and exposure assessment for the human populations and/or ecological systems involved. In order to control and mitigate the particles in the view of health and environmental risk reduction, a good understanding of the relative and absolute contribution from the emission sources to the airborne concentrations is necessary. For these purposes, the concentration and size distribution of particles in terms of mass and number in a waste gas of a municipal waste incineration plant were measured in the stack gas. The mass concentrations obtained are well below the imposed daily threshold value for both incineration lines and the mass size distribution is on average very stable. The total number concentrations are between 1 x 10(5) and 2 x 10(5)particles/cm(3) and are on average relatively stable from one test to another. The measured values and the comparison with other point sources show a very low total number concentration of particles at the stack gas, revealing the importance of the flue gas treatment also for ultrafine particles. Also in respect to linear sources (high and light duty vehicles), the comparison shows a negligible emission in terms of the total number of particles.

摘要

垃圾燃烧过程会产生大量颗粒和气体产物。其中尤为重要的是超细颗粒(空气动力学直径小于0.1微米),所有燃烧源都会大量排放此类颗粒。毒理学和流行病学研究的最新发现表明,细颗粒和超细颗粒可能会带来健康和环境风险。量化燃烧源的颗粒物排放很重要,原因如下:(i)检查源状况是否符合法规;(ii)在地方、区域和国家层面建立此类排放清单,以便制定与空气质量相关的适当管理和控制策略;(iii)预测源所在区域的环境空气质量;(iv)对相关人群和/或生态系统进行源解析和暴露评估。为了从降低健康和环境风险的角度控制和减轻颗粒物,有必要充分了解排放源对空气中颗粒物浓度的相对和绝对贡献。出于这些目的,在一座城市垃圾焚烧厂的烟囱废气中,对颗粒的质量浓度和数量浓度及粒径分布进行了测量。两条焚烧线测得的质量浓度均远低于规定的每日阈值,且质量粒径分布平均非常稳定。总数量浓度在1×10⁵至2×10⁵个颗粒/立方厘米之间,并且从一次测试到另一次测试平均相对稳定。测量值以及与其他点源的比较表明,烟囱废气中的颗粒总数量浓度非常低,这表明烟气处理对超细颗粒也很重要。与线性源(重型和轻型车辆)相比,在颗粒总数方面的排放也可忽略不计。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验