Munir S, Daood S S, Nimmo W, Cunliffe A M, Gibbs B M
Energy and Resources Research Institute, School of Process, Environmental and Materials Engineering, University of Leeds, Leeds, UK.
Bioresour Technol. 2009 Feb;100(3):1413-8. doi: 10.1016/j.biortech.2008.07.065. Epub 2008 Oct 1.
Thermal degradation, reactivity and kinetics for biomass materials cotton stalk (CS), sugarcane bagasse 1 (SB1), sugarcane bagasse 2 (SB2) and shea meal (SM) have been evaluated under pyrolysis (N(2)) and oxidising (dry air) conditions, using a non-isothermal thermogravimetric method (TGA). In the cases of CS and SB1 the peak temperatures were 51 degrees C higher for pyrolysis compared with oxidative degradation, whereas for SB2 and SM the difference was approximately 38 degrees C. However, the differences in the rates of weight loss were significantly higher under oxidising conditions for all the materials studied. Maximum rate of weight loss (%s(-1)) under pyrolysis conditions ranged from 0.10 to 0.18 whereas these values accelerated to the range of 0.19-0.28 under oxidising conditions, corresponding to respective peak temperatures. Samples ranked in order of reactivity (R(M)x10(3)) (%s(-1) degrees C(-1)) are CS=1.31 approximately SM=1.30>SB2=1.14>SB1=0.94 for air and CS=0.54>SB2=0.49>SB1=0.45>SM=0.31 for nitrogen. Shea meal exhibited a complex char combustion behaviour indicating that there may be two distinct types of char derived from fibrous and woody components in the original material. Activation energy calculations were based on the Arrhenius correlation.
采用非等温热重法(TGA),在热解(N₂)和氧化(干燥空气)条件下,对生物质材料棉秆(CS)、甘蔗渣1(SB1)、甘蔗渣2(SB2)和乳木果粕(SM)的热降解、反应活性和动力学进行了评估。在CS和SB1的情况下,热解的峰值温度比氧化降解高51℃,而对于SB2和SM,差异约为38℃。然而,在所研究的所有材料中,氧化条件下的失重速率差异明显更大。热解条件下的最大失重速率(%s⁻¹)范围为0.10至0.18,而在氧化条件下这些值加速至0.19 - 0.28范围,对应各自的峰值温度。按反应活性(R(M)x10³)(%s⁻¹℃⁻¹)排序的样品,对于空气,顺序为CS = 1.31≈SM = 1.30>SB2 = 1.14>SB1 = 0.94;对于氮气,顺序为CS = 0.54>SB2 = 0.49>SB1 = 0.45>SM = 0.31。乳木果粕表现出复杂的焦炭燃烧行为,表明原始材料中可能存在两种源自纤维和木质成分的不同类型的焦炭。活化能计算基于阿伦尼乌斯相关性。