Genotoxic and oxidative effects induced on A549 cells by extract of PM10 collected in an electric steel plant.

The present study was aimed at assessing the carcinogenic risk of occupational exposure to PM10 in electric steel plants. PM10 was collected on cellulose filter respectively outside (site 1) and inside (site 2) the furnace area, was measured, extracted and its metal content was analysed by ICP-MS. Cells were exposed for 30 min, 2 and 4 hours to extract of filter from each site diluted at 0.004, 0.008 and 0.02%. The direct/oxidative DNA damage caused by PM10 was evaluated on A549 cells by Fpg-modified comet assay, analysing Tail moment (TM) and comet percentage. Air samples contained 1.08 mg/m3 of PM10 in site 1 and 5.54 mg/m3in site 2 and different amounts of metals with higher levels of Zn, Al, Ni, Pb, Cd, Cr, Ba in site 2 and of Fe, Mn, Sb in site 1. In cells exposed for 2h to PM10 from both sites, an oxidative DNA damage was found concentrations of 0.008% and 0.02%. For site 2, a direct DNA damage at 0.02% was also found. After 4h a direct/oxidative DNA damage was detected at 0.02% for site 2 and an oxidative DNA damage for site 1. The results indicate a moderate DNA damage induction by used diluitions of PM10 extracts with higher extent for more polluted site 2. These findings show the suitability of this experimental model to evaluate early DNA damage induced by complex mixtures containing metals on target organ, suggesting its use to study biological effects of occupational exposure to such substances.