Wear of human enamel and nano-filled composite resin denture teeth under different loading forces.

To evaluate and correlate the two-body wear of human enamel and nano-filled composite resin teeth with the loading forces used in a dual-axis chewing simulator. Three groups of human enamel and three of nano-filled composite resin teeth were tested in a chewing simulator. Zirconia ceramic balls were used as antagonists. The teeth were tested with three different loading forces (20, 49 and 78 N). Wear was analysed by measuring the volume and vertical substance loss using a laser scanner after 300000 chewing cycles. Data were statistically analysed using two-way anova followed by the Scheffé test (P < or = 0.05). Spearman correlation test was used to determine whether there was a relationship between the loading force and the degree to which the human enamel and composite resin had worn. An increase in the loading force significantly increased the wear of composite resin and of human enamel. The effect of the loading force on the wear was statistically significant at the 0.001 level. Human enamel showed a lower volume and vertical substance loss than composite resin under loading forces of 20 and 49 N and lower vertical loss under loading force of 78 N. The correlation between the volume loss and loading force was statistically significant (r = 0.616, P < 0.001). Nano-filled composite resin and human enamel exhibited different amount of wear under different loading forces. In general, human enamel showed less vertical substance loss than nano-filled composite resin.