Zhou Li, Gao Chao, Zhu Dandan, Xu Weijian, Chen Fanqing Frank, Palkar Amit, Echegoyen Luis, Kong Eric Siu-Wai
Department of Polymer Science and Engineering and Key, Laboratory of Macromolecular Synthesis and Functionalization, Ministry of Education, Zhejiang University, 38 Zheda Road, Hangzhou 310027, PR China.
Chemistry. 2009;15(6):1389-96. doi: 10.1002/chem.200801642.
Facile functionalization of multilayer fullerenes (carbon nano-onions, CNOs) was carried out by [2+1] cycloaddition of nitrenes. The products were further derivatized by using the "grafting from" strategy of in situ ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP). Using one-step nitrene chemistry with high-energy reagents, such as azidoethanol and azidoethyl 2-bromo-2-methyl propanoate, in N-methyl-2-pyrrolidone at 160 degrees C for 16 h, hydroxyl and bromide functionalities were introduced onto the surfaces of CNOs. These hydroxyl CNOs (CNO-OH) and bromic CNOs (CNO-Br) were extensively characterized by various techniques such as thermal gravimetric analysis (TGA), transmission electron microscopy (TEM), Raman spectroscopy and X-ray photo electron spectroscopy (XPS). TGA measurements indicated that the surface hydroxyl and bromide group density reached 1.49 and 0.49 mmol g(-1), respectively. The as-functionalized CNOs showed much better solubility in solvents than pristine CNOs. The CNO-OH were also observed to fluoresce at lambda = 453 nm in water. The CNO-OH and CNO-Br can be conveniently utilized as macroinitiators to conduct surface-initiated in-situ polymerizations. Poly(epsilon-caprolactone) (PCL, 45 wt%) and polystyrene (PS, 60 wt%) were then grafted from surfaces of CNOs through the ROP of epsilon-caprolactone with the macroinitiator CNO-OH and the ATRP of styrene with the macroinitiator CNO-Br, respectively. The structures and morphology of the resulting products were characterized by (1)H NMR, scanning electron microscopy (SEM), TEM, and atomic force microscopy (AFM). The polymer functionalized CNOs have good solubility/dispersibility in common organic solvents. The facile and scalable functionalization approaches can pave the way for the comprehensive investigation of chemistry of CNOs and fabrication of novel CNO-based nanomaterials and nanodevices.
通过氮宾的[2+1]环加成反应实现了多层富勒烯(碳纳米洋葱,CNOs)的简便功能化。产物通过原位开环聚合(ROP)和原子转移自由基聚合(ATRP)的“接枝自”策略进一步衍生化。在160℃下于N-甲基-2-吡咯烷酮中使用一步氮宾化学方法与高能试剂(如叠氮乙醇和2-溴-2-甲基丙酸叠氮乙酯)反应16小时,将羟基和溴官能团引入CNOs表面。这些羟基化的CNOs(CNO-OH)和溴化的CNOs(CNO-Br)通过多种技术进行了广泛表征,如热重分析(TGA)、透射电子显微镜(TEM)、拉曼光谱和X射线光电子能谱(XPS)。TGA测量表明表面羟基和溴基团密度分别达到1.49和0.49 mmol g⁻¹。功能化后的CNOs在溶剂中的溶解性比原始CNOs好得多。还观察到CNO-OH在水中于λ = 453 nm处发出荧光。CNO-OH和CNO-Br可方便地用作大分子引发剂来进行表面引发的原位聚合反应。然后分别通过ε-己内酯与大分子引发剂CNO-OH的ROP反应以及苯乙烯与大分子引发剂CNO-Br的ATRP反应,从CNOs表面接枝聚(ε-己内酯)(PCL,45 wt%)和聚苯乙烯(PS,60 wt%)。通过¹H NMR、扫描电子显微镜(SEM)、TEM和原子力显微镜(AFM)对所得产物的结构和形态进行了表征。聚合物功能化的CNOs在常见有机溶剂中具有良好的溶解性/分散性。这种简便且可扩展的功能化方法可为全面研究CNOs的化学性质以及制备新型CNO基纳米材料和纳米器件铺平道路。