Spectrophotometric flow injection determination of trace amounts of thiocyanate based on its reaction with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol and dichromate: assay of the thiocyanate level in saliva from smokers and non-smokers.

A simple and very sensitive spectrophotometric flow injection (FI) procedure for the determination of trace amounts of thiocyanate is described. The proposed method is based on the reaction between thiocyanate and 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol, which, in 2 mol dm-3 acidic media in the presence of a strong oxidizing agent, produces an intensely coloured product. Several oxidants are potentially applicable, but it is shown that dichromate is preferable. As the reaction product formed is unstable and the signal inherently is recorded on a high background level, it is demonstrated that FI constitutes an ideal method in order to monitor reproducibly and repeatedly the kinetically transient signal that is obtained. Based on optimization by a factorial experimental design, the detection limit of the procedure was found to be 3.5 mumol dm-3, and the standard deviation between samples was 0.16 mumol dm-3. No significant interferences were observed; a 1000-fold excess of cyanide could readily be tolerated within the experimental error. With a sample volume of 50 microliters being injected, the sampling frequency was 60 samples h-1. The system was tested with saliva samples from non-smokers and smokers, and the results show that it is possible to distinguish between these two categories of individuals. As an added benefit, the detection limit of the analytical procedure allows the samples to be diluted 100-fold, so that centrifugation for 5 min is the only preliminary sample preparation that is necessary.