Suppr超能文献

城市固体废弃物的静态、容器内堆肥与高温厌氧消化及两种工艺组合的比较。

Comparison of static, in-vessel composting of MSW with thermophilic anaerobic digestion and combinations of the two processes.

作者信息

Walker Lee, Charles Wipa, Cord-Ruwisch Ralf

机构信息

Faculty of Sustainability, Environmental and Life Sciences, School of Biological Sciences and Biotechnology, Murdoch University, South Street, Murdoch, Western Australia 6150, Australia.

出版信息

Bioresour Technol. 2009 Aug;100(16):3799-807. doi: 10.1016/j.biortech.2009.02.015. Epub 2009 Apr 3.

Abstract

The biological stabilisation of the organic fraction of municipal solid waste (OFMSW) into a form stable enough for land application can be achieved via aerobic or anaerobic treatments. To investigate the rates of degradation (e.g. via electron equivalents removed, or via carbon emitted) of aerobic and anaerobic treatment, OFMSW samples were exposed to computer controlled laboratory-scale aerobic (static in-vessel composting), and anaerobic (thermophilic anaerobic digestion with liquor recycle) treatment individually and in combination. A comparison of the degradation rates, based on electron flow revealed that provided a suitable inoculum was used, anaerobic digestion was the faster of the two waste conversion process. In addition to faster maximum substrate oxidation rates, anaerobic digestion (followed by post-treatment aerobic maturation), when compared to static composting alone, converted a larger fraction of the organics to gaseous end-products (CO2 and CH4), leading to improved end-product stability and maturity, as measured by compost self-heating and root elongation tests, respectively. While not comparable to windrow and other mixed, highly aerated compost systems, our results show that in the thermophilic, in-vessel treatment investigated here, the inclusion of a anaerobic phase, rather than using composting alone, improved hydrolysis rates as well as oxidation rates and product stability. The combination of the two methods, as used in the DiCOM process, was also tested allowing heat generation to thermophilic operating temperature, biogas recovery and a low odour stable end-product within 19 days of operation.

摘要

城市固体废物有机组分(OFMSW)的生物稳定化处理,使其达到足够稳定的形式以便用于土地,可以通过好氧或厌氧处理来实现。为了研究好氧和厌氧处理的降解速率(例如通过去除的电子当量或通过排放的碳),将OFMSW样品分别单独以及组合地进行计算机控制的实验室规模好氧处理(静态容器内堆肥)和厌氧处理(带液体循环的嗜热厌氧消化)。基于电子流的降解速率比较表明,如果使用合适的接种物,厌氧消化是两种废物转化过程中较快的一种。与单独的静态堆肥相比,除了更快的最大底物氧化速率外,厌氧消化(随后进行后处理好氧熟化)将更大比例的有机物转化为气态终产物(CO2和CH4),分别通过堆肥自热和根伸长试验来衡量,从而提高了终产物的稳定性和成熟度。虽然与条垛式堆肥和其他混合的、高度曝气的堆肥系统不可比,但我们的结果表明,在此处研究的嗜热容器内处理中,加入厌氧阶段而非仅使用堆肥,提高了水解速率以及氧化速率和产物稳定性。还测试了DiCOM工艺中使用的两种方法的组合,在运行19天内可产生热量至嗜热操作温度、回收沼气并得到低气味的稳定终产物。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验