Lee Ki Rahm, Kang Ik-Joong
Department of Chemical and Bio Engineering, Kyungwon University, Bokjung-dong, Sujung-gu, Sungnam-shi, Gyunggi-do 461-701, Republic of Korea.
Ultramicroscopy. 2009 Jul;109(8):894-8. doi: 10.1016/j.ultramic.2009.03.012. Epub 2009 Mar 19.
The Unified Parkinson's Disease Rating Scale (UPDRS) is currently used to assess Parkinson's disease, and is a key method for determining the progression of disease based on the gross findings of patients. However, this method cannot quantify the extent of disease of patients, which means the administration of drugs cannot be determined on a real-time basis. Thalamotomy also causes discomfort and pain to the patients, and adversely affects treatment as it is performed following the onset of symptoms. Accordingly, the dopamine concentration, which is one of the key factors in determining this disease, needs to be detected quantitatively at ordinary times. Hence, the development of a bio-kit or a bio-sensor is essential for effectively prescribing the correct dopamine concentration in a customizable manner. In this study, the effect of dopamine level on this phenomenon was observed using the Forster resonance energy transfer (FRET) phenomenon generated between a donor and acceptor. By confirming the photoluminescence (PL) and lifetime data, it was demonstrated that the degree of energy transfer increased with increasing dopamine concentration. To apply this phenomenon to an optical sensor, a glass surface was modified with a quantum dot (QD)-encapsulated dendrimer, and analyzed using the contact angle and ATR-FTIR. The topology of surface was determined by an atomic force microscope (AFM).
统一帕金森病评定量表(UPDRS)目前用于评估帕金森病,是基于患者的总体检查结果来确定疾病进展的关键方法。然而,这种方法无法量化患者的疾病程度,这意味着无法实时确定药物的使用剂量。丘脑切开术也会给患者带来不适和疼痛,并且由于在症状出现后才进行,会对治疗产生不利影响。因此,作为决定这种疾病的关键因素之一的多巴胺浓度,需要在平时进行定量检测。因此,开发一种生物试剂盒或生物传感器对于以可定制的方式有效开出正确的多巴胺浓度至关重要。在本研究中,利用供体和受体之间产生的福斯特共振能量转移(FRET)现象观察了多巴胺水平对该现象的影响。通过确认光致发光(PL)和寿命数据,证明了能量转移程度随多巴胺浓度的增加而增加。为了将这种现象应用于光学传感器,用包封量子点(QD)的树枝状大分子修饰玻璃表面,并使用接触角和衰减全反射傅里叶变换红外光谱(ATR-FTIR)进行分析。通过原子力显微镜(AFM)确定表面的拓扑结构。