Huang Juan, Zheng Chan, Feng Miao, Zhan Hong-Bing
College of Materials Science and Engineering, Fuzhou University, Fuzhou, China.
Guang Pu Xue Yu Guang Pu Fen Xi. 2009 Jan;29(1):207-10.
In decades, metallo-phthalocyanines (MPcs) have undergone a renaissance because of their singular and unconventional physical properties. However, for the successful application of MPcs in practical devices, it is important to disperse MPc molecules into solid state matrix to fabricate MPc doped composite with desired properties. Inorganic glass is an ideal matrix because of its transparency and high environmental stability. One attractive approach to fabricating MPc/inorganic composite is sol-gel technique. In the present paper, silica gel glass matrix was prepared by hydrolysis and poly-condensation of tetraethyloxysilane. 1,2-dicyanobenzene and analytically pure soluble nickle salt were used as the nickle phthalocyanine (NiPc) reactants and chemical synthesis technique was used to prepare NiPc doped sol-gel materials at several temperatures. During the heat treatment, four 1, 2-dicyanobenzene molecules and one nickle ion collide to form a NiPc molecule. In-situ synthesizing process of NiPc in the pores of silica gel glass matrix was traced by UV/Vis absorption spectra. Owing to the remarkable absorption band of NiPc in visible region, quantity of in-situ synthesized NiPc was calculated by the absorbance at certain wavelength of 670 nm, using composites with physically doped NiPc as a reference. The in-situ synthesized kinetics was studied in detail and found to be consistent with Avrami-Erofeev equation The reaction grades were deduced to be 4.5, 4.5, 3.7, 3.2 and 1.9 respectively at temperatures of 180 degrees C, 185 degrees C, 190 degrees C, 195 degrees C and 200 degrees C, respectively.
几十年来,金属酞菁(MPcs)因其独特而非传统的物理性质经历了复兴。然而,为了使MPcs在实际器件中成功应用,将MPc分子分散到固态基质中以制备具有所需性能的MPc掺杂复合材料非常重要。无机玻璃因其透明度和高环境稳定性而成为理想的基质。制备MPc/无机复合材料的一种有吸引力的方法是溶胶 - 凝胶技术。在本文中,通过四乙氧基硅烷的水解和缩聚制备了硅胶玻璃基质。使用1,2 - 二氰基苯和分析纯的可溶性镍盐作为镍酞菁(NiPc)反应物,并采用化学合成技术在几个温度下制备了NiPc掺杂的溶胶 - 凝胶材料。在热处理过程中,四个1,2 - 二氰基苯分子与一个镍离子碰撞形成一个NiPc分子。通过紫外/可见吸收光谱追踪了NiPc在硅胶玻璃基质孔中的原位合成过程。由于NiPc在可见光区域有显著的吸收带,以物理掺杂NiPc的复合材料为参考,通过670 nm特定波长处的吸光度计算原位合成NiPc的量。详细研究了原位合成动力学,发现其与阿弗拉米 - 埃罗费耶夫方程一致。在180℃、185℃、190℃、195℃和200℃的温度下,反应级数分别推导为4.5、4.5、3.7、3.2和1.9。