Suppr超能文献

用于检测食品中乳糜泻毒性麦醇溶蛋白的电化学免疫传感器。

Electrochemical immunosensor for detection of celiac disease toxic gliadin in foodstuff.

作者信息

Nassef Hossam M, Bermudo Redondo M Carmen, Ciclitira Paul J, Ellis H Julia, Fragoso Alex, O'Sullivan Clara K

机构信息

Nanobiotechnology & Bioanalysis Group, Department of Chemical Engineering, Universitat Rovira i Virgili, Avinguda Països Catalans 26, 43007 Tarragona, Spain.

出版信息

Anal Chem. 2008 Dec 1;80(23):9265-71. doi: 10.1021/ac801620j.

Abstract

Celiac disease is a gluten-sensitive enteropathy that affects as much as 1% of the population. Patients with celiac disease should maintain a lifelong gluten-free diet, in order to avoid serious complications and consequences. It is essential to have methods of analysis to reliably control the contents of gluten-free foods, and there is a definitive need for an assay that is easy to use, and can be used on site, to facilitate the rapid testing of incoming raw materials or monitoring for gluten contamination, by industries generating gluten-free foods. Here, we report on the development of an electrochemical immunosensor exploiting an antibody raised against the putative immunodominant celiac disease epitope, for the measurement of gliadin content and potential celiac toxicity of a foodstuff. To develop the gliadin immunosensor, we explored the use of two surface chemistries, based on the use of dithiols, 22-(3,5-bis((6-mercaptohexyl)oxy)phenyl)-3,6,9,12,15,18,21-heptaoxadocosanoic acid (1) and 1,2-dithiolane-3-pentanoic acid (thioctic acid) (2), for anchoring of the capture antibody. The different surface chemistries were evaluated in terms of time required for formation of self-assembled monolayers, stability, susceptibility to nonspecific binding, reproducibility, and sensitivity. The thioctic acid self-assembled monolayer took more than 100 h to attain a stable surface and rapidly destabilized following functionalization with capture antibody, while the heptaoxadocosanoic acid surface rapidlyformed (less than 3 h) and was stable for at least 5 days, stored at room temperature, following antibody immobilization. Both surface chemistries gave rise to highly sensitive immunosensors, with detection limits of 5.5 and 11.6 ng/mL being obtained for 1 and 2, respectively, with nonspecific binding of just 2.7% of the specific signal attained. The immunosensors were extremely reproducible, with RSD of 5.2 and 6.75% obtained for 1 and 2 (n = 5, 30 ng/mL), respectively. Finally, the immunosensor was applied to the analysis of commercial gluten-free and gluten-containing raw and processed foodstuffs, and excellent correlation achieved when its performance compared to that of an ELISA.

摘要

乳糜泻是一种麸质敏感性肠病,影响着多达1%的人口。乳糜泻患者应终身保持无麸质饮食,以避免严重的并发症和后果。拥有可靠控制无麸质食品成分的分析方法至关重要,并且迫切需要一种易于使用且可现场使用的检测方法,以便无麸质食品生产行业能够对 incoming 原材料进行快速检测或监测麸质污染情况。在此,我们报告了一种电化学免疫传感器的开发情况,该传感器利用针对假定的乳糜泻免疫显性表位产生的抗体来测量食品中的麦醇溶蛋白含量和潜在的乳糜泻毒性。为了开发麦醇溶蛋白免疫传感器,我们探索了基于使用二硫醇、22-(3,5-双((6-巯基己基)氧基)苯基)-3,6,9,12,15,18,21-七氧二十二烷酸(1)和1,2-二硫戊环-3-戊酸(硫辛酸)(2)的两种表面化学方法,用于固定捕获抗体。从自组装单层形成所需时间、稳定性、非特异性结合敏感性、重现性和灵敏度等方面对不同的表面化学方法进行了评估。硫辛酸自组装单层需要超过100小时才能达到稳定表面,在用捕获抗体功能化后会迅速不稳定,而七氧二十二烷酸表面迅速形成(不到3小时),在抗体固定后于室温下储存至少5天仍保持稳定。两种表面化学方法都产生了高度灵敏的免疫传感器,对于1和2分别获得了5.5和11.6 ng/mL的检测限,非特异性结合仅达到特异性信号的2.7%。免疫传感器具有极高的重现性,对于1和2分别获得了5.2%和6.75%的相对标准偏差(RSD)(n = 5, 30 ng/mL)。最后,将该免疫传感器应用于市售无麸质和含麸质的原材料及加工食品的分析,与酶联免疫吸附测定(ELISA)相比,其性能具有出色的相关性。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验