Department of Medicinal Chemistry, National Institute of Pharmaceutical Education and Research (NIPER), Sector 67, S. A. S. Nagar 160 062, Punjab, India.
J Org Chem. 2009 Aug 21;74(16):5967-74. doi: 10.1021/jo900614s.
A convenient and clean procedure of esterification is reported by direct condensation of equimolar amounts of carboxylic acids with alcohols catalyzed by an easy to prepare catalyst system of perchloric acid immobilized on silica gel (HClO(4)-SiO(2)). The direct condensation of aryl, heteroaryl, styryl, aryl alkyl, alkyl, cycloalkyl, and long-chain aliphatic carboxylic acids with primary/secondary alkyl/cycloalkyl, allyl, propargyl, and long-chain aliphatic alcohols has been achieved to afford the corresponding esters in excellent yields. Chiral alcohol and N-t-Boc protected chiral amino acid also resulted in ester formation with the representative carboxylic acid or alcohol without competitive N-t-Boc deprotection and detrimental effect on the optical purity of the product demonstrating the mildness and chemoselectivity of the procedure. The esters of long-chain (>C(10)) acids and alcohols are obtained in high yields. The catalyst is recovered and recycled without significant loss of activity. The industrial application of the esterification process is demonstrated by the synthesis of prodrugs of ibuprofen and a few commercial flavoring agents. Other protic acids such as H(2)SO(4), HBr, TfOH, HBF(4), and TFA that were adsorbed on silica gel were less effective compared to HClO(4)-SiO(2) following the order HClO(4)-SiO(2) >> H(2)SO(4)-SiO(2) > HBr-SiO(2) > TfOH-SiO(2) >> HBF(4)-SiO(2) approximately TFA-SiO(2). When HClO(4) was immobilized on other solid supports the catalytic efficiency followed the order HClO(4)-SiO(2) > HClO(4)-K10 > HClO(4)-Al(2)O(3) (neutral) > HClO(4)-Al(2)O(3) (acidic) > HClO(4)-Al(2)O(3) (basic).
一种方便且清洁的酯化方法,通过等摩尔量的羧酸与醇在由易制备的固定在硅胶上的高氯酸(HClO(4)-SiO(2))组成的催化剂体系的直接缩合来实现。已成功实现了芳基、杂芳基、苯乙烯基、芳烷基、烷基、环烷基和长链脂肪族羧酸与伯/仲烷基/环烷基、烯丙基、炔丙基和长链脂肪族醇的直接缩合,以极好的收率得到相应的酯。手性醇和 N-t-Boc 保护的手性氨基酸也与代表性羧酸或醇反应形成酯,而没有竞争的 N-t-Boc 脱保护和对产物光学纯度的不利影响,证明了该方法的温和性和化学选择性。长链(>C(10))酸和醇的酯以高收率获得。催化剂回收后可重复使用,活性损失可忽略不计。酯化工艺的工业应用通过布洛芬前药和一些商业调味剂的合成得到了证明。其他质子酸,如吸附在硅胶上的 H(2)SO(4)、HBr、TfOH、HBF(4)和 TFA 的效果不如 HClO(4)-SiO(2),其顺序为 HClO(4)-SiO(2) > H(2)SO(4)-SiO(2) > HBr-SiO(2) > TfOH-SiO(2) > HBF(4)-SiO(2) > TFA-SiO(2)。当 HClO(4)固定在其他固体载体上时,催化效率的顺序为 HClO(4)-SiO(2) > HClO(4)-K10 > HClO(4)-Al(2)O(3)(中性)> HClO(4)-Al(2)O(3)(酸性)> HClO(4)-Al(2)O(3)(碱性)。