Kaya Mehmet, Gregory Thomas S, Dayton Paul A
Joint Department of Biomedical Engineering, University of North Carolina and North Carolina State University, Chapel Hill, NC 27599, USA.
Ultrasound Med Biol. 2009 Oct;35(10):1748-55. doi: 10.1016/j.ultrasmedbio.2009.04.023. Epub 2009 Jul 26.
Stabilized microbubbles are used as ultrasound contrast agents. These micron-sized gas capsules are injected into the bloodstream to provide contrast enhancement during ultrasound imaging. Some contrast imaging strategies, such as destruction-reperfusion, require a continuous injection of microbubbles over several minutes. Most quantitative imaging strategies rely on the ability to administer a consistent dose of contrast agent. Because of the buoyancy of these gas-filled agents, their spatial distribution within a syringe changes over time. The population of microbubbles that is pumped from a horizontal syringe outlet differs from initial population as the microbubbles float to the syringe top. In this manuscript, we study the changes in the population of a contrast agent that is pumped from a syringe caused by microbubble flotation. Results are presented in terms of change in concentration and change in mean diameter, as a function of time, suspension medium and syringe diameter. Data illustrate that the distribution of contrast agents injected from a syringe changes in both concentration and mean diameter over several minutes without mixing. We discuss the application of a mixing system and viscosity agents to keep the contrast solution more evenly distributed in a syringe. These results are significant for researchers using microbubble contrast agents in continuous-infusion applications where it is important to maintain consistent contrast agent delivery rate, or in situations where the injection syringe cannot be mixed immediately before administration.
稳定的微泡用作超声造影剂。这些微米级的气体胶囊被注入血流中,以便在超声成像期间提供造影增强。一些造影成像策略,如破坏-再灌注,需要在几分钟内持续注入微泡。大多数定量成像策略依赖于能够给予一致剂量的造影剂。由于这些充气剂的浮力,它们在注射器内的空间分布会随时间变化。当微泡漂浮到注射器顶部时,从水平注射器出口泵出的微泡群体与初始群体不同。在本手稿中,我们研究了由微泡漂浮导致的从注射器泵出的造影剂群体的变化。结果以浓度变化和平均直径变化的形式呈现,作为时间、悬浮介质和注射器直径的函数。数据表明,在不混合的情况下,从注射器注入的造影剂分布在几分钟内会在浓度和平均直径方面发生变化。我们讨论了混合系统和粘性剂的应用,以使造影剂溶液在注射器中更均匀地分布。这些结果对于在连续输注应用中使用微泡造影剂的研究人员具有重要意义,在这些应用中,保持一致的造影剂输送速率很重要,或者在注射前不能立即混合注射器的情况下也是如此。