Suppr超能文献

用于肢体长度不等的机械轴跟随式钉骺阻滞术

Mechanical axis following staple epiphysiodesis for limb-length inequality.

作者信息

Gorman Troy M, Vanderwerff Ryan, Pond Michael, MacWilliams Bruce, Santora Stephen D

机构信息

Department of Orthopaedics, University of Utah, 590 Wakara Way, Salt Lake City, UT 84108, USA.

出版信息

J Bone Joint Surg Am. 2009 Oct;91(10):2430-9. doi: 10.2106/JBJS.H.00896.

Abstract

BACKGROUND

Staple epiphysiodesis is an option for the treatment of limb-length discrepancies, but it is not without complications. The purpose of this study was to review the outcomes of staple epiphysiodesis, including changes in the mechanical axis.

METHODS

The study included patients who underwent, between 1990 and 2005, staple epiphysiodesis of the femur or tibia, or both, to address limb-length discrepancy. We reviewed preoperative, postoperative, and final long standing anteroposterior radiographs of fifty-four patients to assess limb-length discrepancy, shifts in the mechanical axis, changes in the mechanical axis zone, and changes in the anatomic lateral distal femoral angle and the medial proximal tibial angle. Postoperative radiographs were also reviewed to assess the adequacy of staple placement.

RESULTS

Three staple epiphysiodesis groups were identified: fifteen patients who underwent a distal femoral staple epiphysiodesis, eighteen who underwent a proximal tibial procedure, and twenty-one who underwent combined distal femoral and proximal tibial procedures. Fifty percent (twenty-seven) of the fifty-four patients showed a shift in the mechanical axis of > or =1 cm as compared with the preoperative measurement. Eighty-nine percent of these large shifts were varus in nature. The proximal tibial and combined epiphysiodeses resulted in significantly larger shifts in the mechanical axis (p = 0.002 and p = 0.006, respectively) and zone changes (p = 0.009 and p = 0.006, respectively) than did the distal femoral procedures. Six patients ultimately underwent a high tibial osteotomy to correct a post-stapling varus deformity. The proximal-lateral aspect of the tibia was by far the most common location for inadequate staple placement.

CONCLUSIONS

Mechanical axis deviation is common following staple epiphysiodesis for the treatment of limb-length discrepancy. Proximal tibial and combined distal femoral and proximal tibial staple epiphysiodeses, even if done well technically, lead to clinically relevant shifts in the mechanical axis of the lower extremity more than half of the time. Distal femoral staple epiphysiodesis may still be a safe option for the treatment of limb-length discrepancy, but we advise caution when utilizing proximal tibial staple epiphysiodesis to treat limb-length inequality.

摘要

背景

骨骺固定术是治疗肢体长度差异的一种选择,但并非没有并发症。本研究的目的是回顾骨骺固定术的结果,包括机械轴的变化。

方法

该研究纳入了1990年至2005年间接受股骨或胫骨或两者的骨骺固定术以解决肢体长度差异的患者。我们回顾了54例患者术前、术后及最终长期的前后位X线片,以评估肢体长度差异、机械轴的偏移、机械轴区域的变化以及股骨远端外侧解剖角和胫骨近端内侧角的变化。还回顾了术后X线片以评估固定钉放置的 adequacy。

结果

确定了三组骨骺固定术患者:15例行股骨远端骨骺固定术,18例行胫骨近端手术,21例行股骨远端和胫骨近端联合手术。与术前测量相比,54例患者中有50%(27例)的机械轴偏移≥1 cm。这些大的偏移中89%本质上是内翻。与股骨远端手术相比,胫骨近端和联合骨骺固定术导致机械轴的偏移(分别为p = 0.002和p = 0.006)和区域变化(分别为p = 0.009和p = 0.006)明显更大。6例患者最终接受了高位胫骨截骨术以纠正固定钉后的内翻畸形。胫骨近端外侧是固定钉放置不足最常见的位置。

结论

在采用骨骺固定术治疗肢体长度差异后,机械轴偏差很常见。胫骨近端以及股骨远端和胫骨近端联合骨骺固定术,即使技术上操作良好,超过半数的情况下会导致下肢机械轴出现具有临床意义的偏移。股骨远端骨骺固定术可能仍是治疗肢体长度差异的安全选择,但我们建议在使用胫骨近端骨骺固定术治疗肢体长度不等时要谨慎。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验