Department of Chemistry & Chemical Biology, Waksman Institute, Rutgers University, Piscataway, New Jersey 08854, USA.
Acc Chem Res. 2009 Dec 21;42(12):1935-43. doi: 10.1021/ar900249x.
Hydrogen is the most promising fuel of the future owing to its carbon-free, high-energy content and potential to be efficiently converted into either electrical or thermal energy. The greatest technical barrier to accessing this renewable resource remains the inability to create inexpensive catalysts for the solar-driven oxidation of water. To date, the most efficient system that uses solar energy to oxidize water is the photosystem II water-oxidizing complex (PSII-WOC), which is found within naturally occurring photosynthetic organisms. The catalytic core of this enzyme is a CaMn(4)O(x) cluster, which is present in all known species of oxygenic phototrophs and has been conserved since the emergence of this type of photosynthesis about 2.5 billion years ago. The key features that facilitate the catalytic success of the PSII-WOC offer important lessons for the design of abiological water oxidation catalysts. In this Account, we examine the chemical principles that may govern the PSII-WOC by comparing the water oxidation capabilities of structurally related synthetic manganese-oxo complexes, particularly those with a cubical Mn(4)O(4) core ("cubanes"). We summarize this research, from the self-assembly of the first such clusters, through the elucidation of their mechanism of photoinduced rearrangement to release O(2), to recent advances highlighting their capability to catalyze sustained light-activated electrolysis of water. The Mn(4)O(4) cubane core assembles spontaneously in solution from monomeric precursors or from Mn(2)O(2) core complexes in the presence of metrically appropriate bidentate chelates, for example, diarylphosphinates (ligands of Ph(2)PO(2)(-) and 4-phenyl-substituted derivatives), which bridge pairs of Mn atoms on each cube face (Mn(4)O(4)L(6)). The Mn(4)O(4) core is enlarged relative to the Mn(2)O(2) core, resulting in considerably weaker Mn-O bonds. Cubanes are ferocious oxidizing agents, stronger than analogous complexes with the Mn(2)O(2) core, as demonstrated both by the range of substrates they dehydrogenate or oxygenate (unactivated alkanes, for example) and the 25% larger O-H bond enthalpy of the resulting mu(3)-OH bridge. The cubane core topology is structurally suited to releasing O(2), and it does so in high yield upon removal of one phosphinate by photoexcitation in the gas phase or thermal excitation in the solid state. This is quite unlike other Mn-oxo complexes and can be attributed to the elongated Mn-O bond lengths and low-energy transition state to the mu-peroxo precursor. The photoproduct, Mn(4)O(2)L(5), an intact nonplanar butterfly core complex, is poised for oxidative regeneration of the cubane core upon binding of two water molecules and coupling to an anode. Catalytic evolution of O(2) and protons from water exceeding 1000 turnovers can be readily achieved by suspending the oxidized cubane, Mn(4)O(4)L(6), into a proton-conducting membrane (Nafion) preadsorbed onto a conducting electrode and electroxidizing the photoreduced butterfly complexes by the application of an external bias. Catalytic water oxidation can be achieved using sunlight as the only source of energy by replacing the external electrical bias with redox coupling to a photoanode incorporating a Ru(bipyridyl) dye.
氢气由于其无碳、高能量含量以及高效转化为电能或热能的潜力,是未来最有前途的燃料。获取这种可再生资源的最大技术障碍仍然是无法为太阳能驱动的水氧化制造廉价的催化剂。迄今为止,利用太阳能氧化水的最有效系统是光合系统 II 水氧化复合物(PSII-WOC),它存在于天然存在的光合生物中。该酶的催化核心是一个 CaMn(4)O(x)簇,它存在于所有已知的产氧光合生物中,并且自大约 25 亿年前这种类型的光合作用出现以来就一直被保守。促进 PSII-WOC 催化成功的关键特征为设计非生物水氧化催化剂提供了重要的经验教训。在本报告中,我们通过比较结构相关的合成锰氧配合物(特别是具有立方 Mn(4)O(4)核的那些配合物,称为“立方烷”)的水氧化能力,来研究可能支配 PSII-WOC 的化学原理。我们总结了这项研究,从第一个此类簇的自组装,到阐明其光诱导重排释放 O(2)的机制,再到最近强调其催化持续光激活水电解的能力的进展。Mn(4)O(4)立方烷核心可以从单体前体或存在适当度量的双齿螯合剂(例如,二芳基膦酸盐(Ph(2)PO(2)(-)和 4-苯基取代衍生物的配体)的情况下,从单体前体或Mn(2)O(2)核配合物在溶液中自发组装。在每个立方体面(Mn(4)O(4)L(6))上桥接一对 Mn 原子的二芳基膦酸盐。Mn(4)O(4)核心与Mn(2)O(2)核心相比,核心扩大,导致 Mn-O 键明显较弱。立方烷是凶猛的氧化剂,比具有Mn(2)O(2)核心的类似配合物更强,这一点从它们脱氢或氧化的底物范围(例如,未活化的烷烃)以及所得的 mu(3)-OH 桥的 25%更大的 O-H 键焓得到证明。立方烷核心拓扑结构适合释放 O(2),并且通过气相中的光激发或固态中的热激发去除一个膦酸盐,可高产率地释放 O(2)。这与其他 Mn-氧配合物完全不同,可以归因于伸长的 Mn-O 键长和低能过渡态到 mu-过氧前体。光产物Mn(4)O(2)L(5)是一个完整的非平面蝶形核配合物,在结合两个水分子并与阳极偶联后,为立方烷核的氧化再生做好了准备。通过将氧化的立方烷Mn(4)O(4)L(6)悬浮在质子传导膜(Nafion)中,并将预吸附在导电电极上,然后应用外部偏压氧化还原光还原的蝶形配合物,可轻松实现超过 1000 次循环的水和质子的催化氧化。通过用光代替外部偏压与包含 Ru(bipyridyl)染料的光电阳极进行氧化还原偶联,可以实现仅使用阳光作为能量源的催化水氧化。