Liu Chien-Hung, Chen Chieh-Li, Lee Hau-Wei, Jywe Wen-Yuh
Institute of Electro-Optical and Materials Science, National Formosa University, Yunlin 632, Taiwan.
Rev Sci Instrum. 2009 Nov;80(11):115112. doi: 10.1063/1.3262504.
This paper presents a Z-tilts compensation stage with three piezoelectric actuators and three guided hinges, which are a combination of a two-dimensional rotational hinge and a spring-type hinge. In order to reduce the nonlinearity of the three piezoelectric actuators, the capacitor insertion method was applied on each piezoelectric actuator. The relationship between the improved nonlinearity and the decreased displacement with various inserted capacitors is discussed and suitable capacitors for the stage are determined. A three-dimensional feedback measuring system composed of a laser interferometer and a quadrant photodiode detector was used to directly measure the real working position of the platform of the Z-tilts compensation stage without measuring the individual displacement of the three piezoelectric actuators. The minimum displacement and angular displacement of the Z-tilt stage were +/-10 nm and +/-0.1 arc sec, respectively. The error of the dynamic response of z, theta(x), and theta(y) with amplitudes of 3 microm of a sine wave at 30 Hz were +/-70 nm, +/-0.1 arc sec, and +/-0.4 arc sec, respectively, with the capacitor insertion method and a simple proportional-integral controller.
